MCF5272VM66 Freescale Semiconductor, MCF5272VM66 Datasheet - Page 282

• Manufacturer Part Number: MCF5272VM66
• Description: IC MPU 66MHZ COLDFIRE 196-MAPBGA
• Manufacturer: Freescale Semiconductor
• Series: MCF527xr

Specifications of MCF5272VM66

• Core Processor: Coldfire V2
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SPI, UART/USART, USB
• Peripherals: DMA, WDT
• Number Of I /o: 32
• Program Memory Size: 16KB (4K x 32)
• Program Memory Type: ROM
• Ram Size: 1K x 32
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 196-MAPBGA
• Family Name: MCF5xxx
• Device Core: ColdFire
• Device Core Size: 32b
• Frequency (max): 66MHz
• Instruction Set Architecture: RISC
• Supply Voltage 1 (typ): 3.3V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 196
• Package Type: MA-BGA
• Cpu Speed: 66MHz
• Embedded Interface Type: UART, QSPI, USB, TDM
• Digital Ic Case Style: BGA
• No. Of Pins: 196
• Supply Voltage Range: 3V To 3.6V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Compliant

Universal Serial Bus (USB)
12-24
Bits
4
3
2
1
0
UNHALT
IN_EOP
IN_EOT
IN_LVL
Name
HALT
Table 12-14. EP0IMR and EP0ISR Field Descriptions (continued)
MCF5272 ColdFire
End of transfer. This bit is set when the end of a transfer has been reached for an IN endpoint.
An EOT interrupt is generated when a packet with a size less than the maximum packet size or
the first zero-length packet following maximum size packets is sent.
0 No interrupt pending
1 Transfer completed
End of packet. This bit is set when a packet has been sent successfully for endpoint 0 IN.
0 No interrupt pending
1 IN packet sent successfully
Unhalt. This bit is set when the endpoint 0 HALT_ST bit is cleared by a SETUP packet or USB
reset.
0 No interrupt pending
1 Endpoint halt cleared
Halt. This bit is set when the endpoint 0 HALT_ST bit is set due to a STALL response to the host.
0 No interrupt pending
1 Endpoint halted
IN FIFO threshold level. This bit indicates that the FIFO level has fallen below the level set in the
EPCTL0 register.
0 No interrupt pending
1 IN FIFO threshold level reached
®
Integrated Microprocessor User’s Manual, Rev. 3
Description
Freescale Semiconductor