E6CP-AG5C-C Omron, E6CP-AG5C-C Datasheet - Page 22

• Manufacturer Part Number: E6CP-AG5C-C
• Description: ENCODER ROTARY 12-24V 8-BIT RES
• Manufacturer: Omron
• Series: E6CPr

Specifications of E6CP-AG5C-C

• Encoder Type: Optical
• Output Type: Gray Code (Absolute)
• Pulses Per Revolution: 256
• Voltage - Supply: 12 ~ 24VDC
• Actuator Type: 6mm Dia Flatted End
• Detent: No
• Built In Switch: No
• Mounting Type: Chassis Mount
• Orientation: Right Angle
• Termination Style: Cable with Connector
• Svhc: No SVHC (15-Dec-2010)
• Encoder Resolution: 256
• Operating Temperature Range: -10°C To +55°C
• Rotational Speed: 1000rpm
• External Depth: 53mm
• External Length / Height: 96mm
• External Width: 96mm
• Supply Voltage Range: 12V To 24V
• Sensor Supply Voltage: 12V To 24V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Rotational Life (cycles Min): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: E6CPAG5CC

Setting ON/OFF Angles in Manual Mode
ON/OFF angles can be set manually using the ANGLE Keys
on the front of the Cam Positioner.
22
Example: Setting Step 1 of Cam No. 2 to Turn ON at 28 and
Set the programming
Set the OFF angle.
Change the mode.
Set the ON angle.
Set the bank No.
Note: Pressing the
Set the cam and step No.
mode switch.
decrement the value. Pressing the other key during automatic increment
or decrement will increase the speed.
and then press the
Press the CAM Keys
Press the STEP Keys
Press the
End
Press the
Press the ANGLE Keys
and then press the
Press the
Press the ANGLE Keys
and then press the
Turn OFF at 51
CAM
CAM
CAM
Cam Positioner
PRGM
TEST
BANK
RUN
ON
ON
Mode
or
STEP
STEP
STEP
Key to specify the bank number
OFF
OFF
Key continually will automatically increment or
Banks can be specified only for
16-/32-output models.
Set the mode switch to PRGM.
Set the programming mode switch to MAN.
WRITE
WRITE
WRITE
Key to flash the
Key to flash the
Key.
Key.
Key.
H8PS
to specify cam No. 2.
to specify step No. 1.
Programming mode
PRG
PRG
PRG
to set an angle of 28
to set an angle of 51
MAN
TCH
"
"
ON
OFF
"
"
.
.
Setting ON/OFF Angles in Teaching
Mode
ON/OFF angles can be set based on actual machine (Encoder)
operation.
Example: Setting the ON/OFF Angles by Teaching Step 2 of
Set the programming
Set the OFF angle.
Change the mode.
Set the ON angle.
Set the bank No.
Set the cam and step No.
mode switch.
then press the
(195 in this example)
End
Press the
Press the
Turn the machine (Encoder) to the desired ON angle.
Press the
Press the CAM Keys
Press the STEP Keys
(278 in this example)
Press the
Turn the machine (Encoder) to the desired OFF angle.
Press the
CAM
CAM
CAM
Cam No. 3
PRGM
TEST
BANK
RUN
WRITE
ON
Mode
WRITE
ON
STEP
STEP
STEP
WRITE
Key to specify the bank number and
OFF
Key.
OFF
Banks can be specified only for
16-/32-output models.
Key.
Set the mode switch to PRGM.
Set the programming mode switch to TCH.
Key to flash the
Key.
Key to flash the
to specify cam No. 3.
Programming mode
to specify step No. 2.
TST
TST
TST
MAN
TCH
"
ON
"
OFF
"
.
"
.