E6CP-AG5C-C Omron, E6CP-AG5C-C Datasheet - Page 25

• Manufacturer Part Number: E6CP-AG5C-C
• Description: ENCODER ROTARY 12-24V 8-BIT RES
• Manufacturer: Omron
• Series: E6CPr

Specifications of E6CP-AG5C-C

• Encoder Type: Optical
• Output Type: Gray Code (Absolute)
• Pulses Per Revolution: 256
• Voltage - Supply: 12 ~ 24VDC
• Actuator Type: 6mm Dia Flatted End
• Detent: No
• Built In Switch: No
• Mounting Type: Chassis Mount
• Orientation: Right Angle
• Termination Style: Cable with Connector
• Svhc: No SVHC (15-Dec-2010)
• Encoder Resolution: 256
• Operating Temperature Range: -10°C To +55°C
• Rotational Speed: 1000rpm
• External Depth: 53mm
• External Length / Height: 96mm
• External Width: 96mm
• Supply Voltage Range: 12V To 24V
• Sensor Supply Voltage: 12V To 24V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Rotational Life (cycles Min): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: E6CPAG5CC

Clearing Settings
Clearing All Programs
The all clear function can be used to delete all cam programs, the
settings for advance angle compensation function, and all other
settings. All settings in the Function Setting Mode will be returned to
their default settings.
CLEAR
Key
CAM
CAM
PRGM
TEST
RUN
Mode
STEP
STEP
Initial Display
Press the
Press the
PRG
PRG
PRG
CLEAR
After the completion of all clear
processing, the screen displays end for
approximately one second and then
resume the previously displayed screen.
If the
pressing the
not be deleted and the previous display
will be resumed.
WRITE
Set the mode switch to PRGM or TEST.
Confirm that clr flashes on the display.
CLEAR
Key for 3 s min.
Key.
Key is pressed again before
WRITE
Key, the settings will
Clearing Individual Steps, Cams, and Banks
ON/OFF angle settings can be deleted by step, by cam, or by bank. If
settings are deleted by cam, the settings for the advance angle
compensation (ADV) function will not be deleted. If settings are
deleted by bank, the settings for the ADV function will also be
deleted. Settings in the Function Setting Mode will not be deleted.
CLEAR
Screens for Individually Clearing Items
Key.
CAM
CAM
CAM
CAM
PRGM
TEST
RUN
Mode
STEP
STEP
STEP
STEP
Initial Display
Press the
Press the
Cam Positioner
PRG
PRG
PRG
PRG
PRG
After the completion of all clear
processing, the screen displays end for
approximately one second and then
resume the previously displayed screen.
If the
pressing the
not be deleted and the previous display
will be resumed.
WRITE
CLEAR
Deleting Settings by Step
Press the STEP Keys
to specify the step to be
deleted.
Deleting Settings by Cams
Press the CAM Keys
specify the cam to be
deleted.
Deleting Settings by Banks
Press the
specify the bank to be
deleted.
Set the mode switch to PRGM or TEST.
CLEAR
Key.
Key.
BANK
Key is pressed again before
WRITE
H8PS
Key to
Key, the settings will
to
25