CX28229G-14 Mindspeed Technologies, CX28229G-14 Datasheet - Page 25

• Manufacturer Part Number: CX28229G-14
• Description: ATM IMA 800Mbps 1.8V/3.3V 256-Pin BGA
• Manufacturer: Mindspeed Technologies

Specifications of CX28229G-14

• Package: 256BGA
• Utopia Type: Level 2
• Typical Operating Supply Voltage: 1.8|3.3 V
• Minimum Operating Supply Voltage: 1.71|3 V
• Maximum Operating Supply Voltage: 1.89|3.6 V
• Maximum Output Rate: 800 Mbps

CX28224/5/9 Data Sheet
Table 1-5. Software Function Summary (2 of 2)
28229-DSH-001-D
Group
Interface
Link
Interface
PHY
Interface
Monitor
User Defined
Class
IMA_group_set ()
IMA_group_get ()
IMA_group_FM_status ()
IMA_group_PM_preset ()
IMA_group_PM_status ()
IMA_link_set ()
IMA_link_get ()
IMA_link_FM_status ()
IMA_link_PM_preset ()
IMA_link_PM_status ()
IMA_phy_link_set ()
IMA_phy_link_get ()
IMA_phy_link_FM_status ()
IMA_phy_link_PM_preset ()
IMA_phy_link_PM_status ()
IMA_mon()
*USER_intr_disable()
*USER_intr_enable()
* USER_event ()
Function
Mindspeed Technologies
This function provides a direct interface to set the
parameters.
This function provides a direct interface to retrieve the
parameters.
This function retrieves the current state of the parameters monitored by the
Facility Monitoring subsystem for the IMA Group layer.
This function allows the user to initialize the IMA Group PM statistics to arbitrary
values for the current interval of the 15 minute accumulation period.
This function retrieves the states (from either the current or previous 15 minute
accumulation interval) of the IMA Group Performance Monitoring parameters.
This function provides a direct interface to set the
parameters.
This function provides a direct interface to retrieve the
parameters.
This function retrieves the current state of the parameters monitored by the
Facility Monitoring subsystem for the IMA Link layer.
This function allows the user to initialize the IMA Link PM statistics to arbitrary
values for the current interval of the 15 minute accumulation period.
This function retrieves the states (from either the current or previous 15 minute
accumulation interval) of the IMA Link Performance Monitoring parameters.
This function provides a direct interface to set the
parameters, per facility.
This function provides a direct interface to retrieve the
parameters, per facility.
This function retrieves the current state of the parameters monitored by the
Failure Monitoring subsystem for the IMA Link layer, per facility.
This function allows the user to initialize the IMA Group PM statistics to arbitrary
values for the current interval of the 15 minute accumulation period.
This function retrieves the states (from either the current or previous 15 minute
accumulation interval) of the IMA Link Performance Monitoring parameters, per
facility.
This function is called to control the
This is an application defined function that disables interrupts from the IMA
hardware device.
This is an application defined function that enables interrupts from the IMA
hardware device.
This is an application defined function that accepts asynchronous event
messages from the
CX28224/5/9
™
Short Description
CX28224/5/9
software.
CX28224/5/9
CX28224/5/9
CX28224/5/9
debugger.
CX28224/5/9
CX28224/5/9
CX28224/5/9
Introduction to IMA
Group
Link
Link
Group
Link
Link
1
-
11