TMPM364F10FG Toshiba, TMPM364F10FG Datasheet - Page 588

• Manufacturer Part Number: TMPM364F10FG
• Manufacturer: Toshiba

Specifications of TMPM364F10FG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 1024K
• Rom Type: Flash
• Ram (kbytes): 64K
• Number Of Pins: 144
• Package: LQFP(20x20)
• Vcc: 3V
• Cpu Mhz: 64
• Ssp (ch) Spi: 1
• I2c/sio (ch): 5
• Uart/sio (ch): 12
• Usb: Host
• Can: 1
• Ethernet: -
• External Bus Interface: Y
• Cs/wait Controller (ch): 4
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: 16
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 16
• Motor / Igbt Control: -
• Real Time Clock: Y
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: Y
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit

16.5
Operation explain of each circuit
16.5.4
the IDs depends on the <GAME> / <LAME> values of the global / local acceptance mask enable bit CAN-
MBxID in the mailbox and the data held in the global/local acceptance mask registers GAM/LAM.
bit CANMBxID<RFH> is set to "1", the CANTRS<TRSx> bit will be set to "1" so that the message is trans-
mitted responding to the remote frame. For a transmit mailbox where the CANMBxID<RFH> bit is set to
"0", the mailbox does not respond to the remote frame even when the ID matches.
and this sets the CANRMP<RMPx> bit and the CANRFP<RFPx> bit to "1".
the <GAME> bit are set to "1", the ID of mailbox x is overwritten with the remote frame ID, and the mail-
box will automatically respond to the remote frame using the ID (The <TRSx> bit is set to transmit a data
frame). Therefore, when the global acceptance mask register CANGAM is used, one mailbox x may respond
to multiple remote frame IDs depending on the mask value.
After a remote frame is received, the remote frame ID is compared to the mailbox ID. The comparison of
After an ID match is detected, no further comparison takes place.
When the remote frame ID matches with the ID of transmit mailbox n where the remote frame handling
If the ID matches with the ID of receive mailbox n, the received message is handled same as a data frame,
When the remote frame ID matches with the ID of mailbox n where both the CANMBxID<RFH> bit and
Remote Frame Control Register
Page 562
TMPM364F10FG