ds3104-se Maxim Integrated Products, Inc., ds3104-se Datasheet

no-image

ds3104-se

Manufacturer Part Number
ds3104-se
Description
Line Card Timing Ic With Synchronous Ethernet Support
Manufacturer
Maxim Integrated Products, Inc.
Datasheet
Some revisions of this device may incorporate deviations from published specifications known as errata.
Multiple revisions of any device may be simultaneously available through various sales channels. For
information about device errata, go to: www.maxim-ic.com/errata. For pricing, delivery, and ordering
information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
The DS3104-SE is a low-cost, feature-rich timing IC for
line cards with synchronous Gigabit Ethernet (GbE),
10-Gigabit Ethernet (10GbE), and Fast Ethernet ports.
ITU-T recommendation G.8261 (formerly G.pactiming)
specifies that network synchronization can be carried
over packet links by synchronizing the bit clock of the
physical layer as is currently done on SONET/SDH
links. The DS3104-SE enables synchronization in
Ethernet line cards in both the transmit and receive
directions.
In the transmit direction, the device accepts traditional
SONET/SDH system clocks such as 19.44MHz from
redundant
frequency-locked xMII clock rates, such as the 125MHz
GTX_CLK for GbE GMIIs. Each Ethernet PHY then
synthesizes a transmit bit clock that is frequency-locked
to the xMII clock, and thus to the system clock and
network clock. In the receive direction, each PHY
divides down the recovered bit clock to produce the
receive xMII clock. The DS3104-SE accepts the xMII
clock from any of several Ethernet ports and forwards a
frequency-locked system clock, such as 19.44MHz, to
the system timing cards. SONET/SDH ports are also
supported.
Line Cards with Any Mix of Synchronous Ethernet and
+Denotes a lead-free/RoHS-compliant package.
Rev: 072407
DS3104GN
DS3104GN+
SONET/SDH Ports in WAN Equipment Including
MSPPs, Ethernet Switches, Routers, DSLAMs, and
Wireless Base Stations
PART
system
________________________________________________________
TEMP RANGE
-40qC to +85qC
-40qC to +85qC
timing
Ordering Information
General Description
cards
Applications
PIN-PACKAGE
81 CSBGA (10mm)
81 CSBGA (10mm)
and
synthesizes
Synchronous Ethernet Support
2
2
Line Card Timing IC with
i
i
i
Timing Card to Line Card Path
i Two Input Clocks from Master and Slave Timing
i Optional Frame Sync Inputs and Outputs
i Continuous Input Clock Quality Monitoring
i Hitless Reference Switching, Automatic or Manual
i Holdover on Loss of All Inputs
i Programmable PLL Bandwidth, 0.1Hz to 400Hz
i Frequency Conversion Between SONET/SDH
i Up to 7 Output Clocks: 3 CMOS/TTL (^ 125MHz),
Line Card to Timing Card Path
i Up to 8 Input Clocks: 4 CMOS/TTL (^ 125MHz)
i Hitless Reference Switching, Automatic or Manual
i Frequency Conversion Between Ethernet
i Two Output Clocks to Master and Slave Timing
General
i Suitable Line Card IC for Stratum 3/3E/4, SMC,
i Numerous Input Clock Frequencies Supported
i Numerous Output Clock Frequencies
i Internal Compensation for Master Clock
i SPI™ Processor Interface
i 1.8V Operation with 2.5V/3.3V I/O (5V Tolerant)
Cards (LVDS/LVPECL or CMOS/TTL)
SONET/SDH: 6.48, N x 19.44, N x 51.84MHz
PDH: N x DS1, N x E1, N x DS2, DS3, E3
Other: 10, 10.24, 13, 30.72MHz
Frame Sync: 2kHz, 8kHz
Custom Clock Rates: Any Multiple of 2kHz Up to
Oscillator
Rates and Ethernet MII/GMII/XGMII Rates
2 LVDS/LVPECL (^ 312.50MHz), and 2 Dual
CMOS/TTL and LVDS/LVPECL
and 4 LVDS/LVPECL/CMOS/TTL (^ 156.25MHz)
MII/GMII/XGMII and SONET/SDH Rates
Cards (CMOS/TTL or LVDS/LVPECL)
SEC
Ethernet xMII: 2.5, 25, 125, 156.25MHz
SONET/SDH: 6.48, N x 19.44, N x 51.84MHz
PDH: N x DS1, N x E1, N x DS2, DS3, E3
Frame Sync: 2kHz, 4kHz, 8kHz
Custom: Any Multiple of 2kHz Up to 131.072MHz,
Supported
Ethernet xMII: 2.5, 25, 125, 156.25, 312.5MHz
Any Multiple of 8kHz Up to 155.52MHz
77.76MHz, Any Multiple of 8kHz Up to
311.04MHz
Maxim Integrated Products
DS3104-SE
Features
1

Related parts for ds3104-se

Related keywords