MC-78F0712-KIT Renesas Electronics America, MC-78F0712-KIT Datasheet - Page 161

• Manufacturer Part Number: MC-78F0712-KIT
• Description: KIT REF SYSTEM 78K0 UPD78F0712
• Manufacturer: Renesas Electronics America

Specifications of MC-78F0712-KIT

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Cautions 1. The settings of LVS50 and LVR50 are valid in other than PWM mode.
Remarks 1. In PWM mode, PWM output is made inactive by clearing TCE50 to 0.
Cautions 1. Be sure to clear bits 0 to 5 to 0.
Remarks In PWM mode, PWM output is made inactive by clearing TCE51 to 0.
Address: FF3FH
Symbol
TMC51
2. If LVS50 and LVR50 are read, the value is 0.
3. The values of the TMC506, LVS50, LVR50, TMC501, and TOE50 bits are reflected at the TO50 pin
2. Perform <1> to <4> below in the following order, not at the same time.
3. Stop operation before rewriting TMC506.
2. Stop operation before rewriting TMC516.
regardless of the value of TCE50.
<1> Set TMC501, TMC506:
<2> Set TOE50 to enable output:
<3> Set LVS50, LVR50 (see Caution 1): Timer F/F setting
<4> Set TCE50
TMC516
TCE51
TCE51
<7>
0
1
0
1
Figure 8-8. Format of 8-Bit Timer Mode Control Register 51 (TMC51)
After reset: 00H
After clearing to 0, count operation disabled (counter stopped)
Count operation start
Mode in which clear & start occurs on a match between TM51 and CR51
PWM (free-running) mode
CHAPTER 8 8-BIT TIMER/EVENT COUNTERS 50 AND 51
TMC516
6
R/W
User’s Manual U17890EJ2V0UD
5
0
TM51 operating mode selection
TM51 count operation control
4
0
Operation mode setting
Timer output enable
3
0
2
0
1
0
0
0
159