MC-78F0712-KIT Renesas Electronics America, MC-78F0712-KIT Datasheet - Page 163

• Manufacturer Part Number: MC-78F0712-KIT
• Description: KIT REF SYSTEM 78K0 UPD78F0712
• Manufacturer: Renesas Electronics America

Specifications of MC-78F0712-KIT

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8.4
8.4.1
of the count value preset to 8-bit timer compare register 5n (CR5n).
TM5n value cleared to 0 and an interrupt request signal (INTTM5n) is generated.
(TCL5n).
8-bit timer/event counter 5n operates as an interval timer that generates interrupt requests repeatedly at intervals
When the count value of 8-bit timer counter 5n (TM5n) matches the value set to CR5n, counting continues with the
The count clock of TM5n can be selected with bits 0 to 2 (TCL50n to TCL52n) of timer clock selection register 5n
<1> Set the registers.
<2> After TCE5n = 1 is set, the count operation starts.
<3> If the values of TM5n and CR5n match, INTTM5n is generated (TM5n is cleared to 00H).
<4> INTTM5n is generated repeatedly at the same interval.
Caution Do not write other values to CR5n during operation.
Remark n = 0, 1
Remark Interval time = (N + 1)
Setting
TM5n count value
Operations of 8-Bit Timer/Event Counters 50 and 51
Operation as interval timer
Clear TCE5n to 0 to stop the count operation.
Count clock
INTTM5n
TCL5n:
CR5n:
TMC5n:
N = 00H to FFH
n = 0, 1
TCE5n
CR5n
Select the count clock.
Compare value
Stop the count operation, select the mode in which clear & start occurs on a match of TM5n
and CR5n.
(TMC5n = 0000
Count start
00H
N
CHAPTER 8 8-BIT TIMER/EVENT COUNTERS 50 AND 51
01H
Figure 8-10. Interval Timer Operation Timing (1/2)
t
t
0B
User’s Manual U17890EJ2V0UD
= Don’t care)
(a) Basic operation
N
Clear
00H
Interrupt acknowledged
N
01H
Interval time
N
Clear
00H
Interrupt acknowledged
N
01H
Interval time
N
N
161