P89V51RC2FN,112 NXP Semiconductors, P89V51RC2FN,112 Datasheet - Page 41

• Manufacturer Part Number: P89V51RC2FN,112
• Description: IC 80C51 MCU FLASH 32K 40-DIP
• Manufacturer: NXP Semiconductors
• Series: 89Vr

Specifications of P89V51RC2FN,112

• Program Memory Type: FLASH
• Program Memory Size: 32KB (32K x 8)
• Package / Case: 40-DIP (0.600", 15.24mm)
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 32
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: P89V5x
• Core: 80C51
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 3
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1017 - BOARD 44-ZIF PLCC SOCKET622-1001 - USB IN-CIRCUIT PROG 80C51ISP
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-2430-5; 935278782112; P89V51RC2FN

NXP Semiconductors
P89V51RB2_RC2_RD2_5
Product data sheet
The following examples will help to show the versatility of this scheme.
Example 1, slave 0:
Example 2, slave 1:
In the above example SADDR is the same and the SADEN data is used to differentiate
between the two slaves. Slave 0 requires a ‘0’ in bit 0 and it ignores bit 1. Slave 1 requires
a ‘0’ in bit 1 and bit 0 is ignored. A unique address for Slave 0 would be 1100 0010 since
slave 1 requires a ‘0’ in bit 1. A unique address for slave 1 would be 1100 0001 since a ‘1’
in bit 0 will exclude slave 0. Both slaves can be selected at the same time by an address
which has bit 0 = 0 (for slave 0) and bit 1 = 0 (for slave 1). Thus, both could be addressed
with 1100 0000.
SADDR = 1100 0000
--------------------------------------------------- -
SADDR = 1100 0000
--------------------------------------------------- -
SADEN = 1111 1101
SADEN = 1111 1110
Fig 16. Schemes used by the UART to detect ‘given’ and ‘broadcast’ addresses when
Given = 1100 00X0
Given = 1100 000X
multiprocessor communications is enabled
rx_byte(7)
rx_byte(0)
saden(7)
saden(0)
saddr(7)
saddr(0)
saddr(7)
saddr(0)
Rev. 05 — 12 November 2009
logic used by UART to detect 'given address' in received data
logic used by UART to detect 'given address' in received data
rx_byte(7)
rx_byte(0)
saden(7)
saden(0)
.
.
.
.
.
.
P89V51RB2/RC2/RD2
8-bit microcontrollers with 80C51 core
given_address_match
broadcast_address_match
002aaa527
© NXP B.V. 2009. All rights reserved.
41 of 80
(4)
(5)