MC9S12HZ128VAL Freescale Semiconductor, MC9S12HZ128VAL Datasheet - Page 203

• Manufacturer Part Number: MC9S12HZ128VAL
• Description: IC MCU 16BIT 2K FLASH 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12HZ128VAL

• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: CAN, EBI/EMI, I²C, SCI, SPI
• Peripherals: LCD, Motor control PWM, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 2.35 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 112-LQFP
• Processor Series: S12H
• Core: HCS12
• Data Bus Width: 16 bit
• Data Ram Size: 6 KB
• Interface Type: I2C/SCI/SPI
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 85
• Number Of Timers: 8
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 6
Oscillator (OSCV2)
6.1
The OSC module provides two alternative oscillator concepts:
6.1.1
The Colpitts OSC option provides the following features:
The Pierce OSC option provides the following features:
Common features:
6.1.2
Two modes of operation exist:
Freescale Semiconductor
•
•
•
•
•
•
•
•
•
•
•
•
A low noise and low power Colpitts oscillator with amplitude limitation control (ALC)
A robust full swing Pierce oscillator with the possibility to feed in an external square wave
Amplitude limitation control (ALC) loop:
— Low power consumption and low current induced RF emission
— Sinusoidal waveform with low RF emission
— Low crystal stress (an external damping resistor is not required)
— Normal and low amplitude mode for further reduction of power and emission
An external biasing resistor is not required
Wider high frequency operation range
No DC voltage applied across the crystal
Full rail-to-rail (2.5 V nominal) swing oscillation with low EM susceptibility
Fast start up
Clock monitor (CM)
Operation from the V
Amplitude limitation controlled Colpitts oscillator mode suitable for power and emission critical
applications
Full swing Pierce oscillator mode that can also be used to feed in an externally generated square
wave suitable for high frequency operation and harsh environments
Introduction
Features
Modes of Operation
DDPLL
2.5 V (nominal) supply rail
MC9S12HZ256 Data Sheet, Rev. 2.05
203