MC68332ACFC25 Freescale Semiconductor, MC68332ACFC25 Datasheet - Page 49

• Manufacturer Part Number: MC68332ACFC25
• Description: IC MCU 32BIT 25MHZ 132-PQFP
• Manufacturer: Freescale Semiconductor
• Series: M683xxr

Specifications of MC68332ACFC25

• Core Processor: CPU32
• Core Size: 32-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Type: ROMless
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 132-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

4.2.13 Freeze Operation
4.3 System Clock
MC68332
USER’S MANUAL
The FREEZE signal halts MCU operations during debugging. FREEZE is asserted in-
ternally by the CPU32 if a breakpoint occurs while background mode is enabled. When
FREEZE is asserted, only the bus monitor, software watchdog, and periodic interrupt
timer are affected. The halt monitor and spurious interrupt monitor continue to operate
normally. Setting the freeze bus monitor (FRZBM) bit in the SIMCR disables the bus
monitor when FREEZE is asserted, and setting the freeze software watchdog
(FRZSW) bit disables the software watchdog and the periodic interrupt timer when
FREEZE is asserted. When FRZSW is set, FREEZE assertion must be at least two
times the PIT clock source period to ensure an accurate number of PIT counts.
The system clock in the SIM provides timing signals for the IMB modules and for an
external peripheral bus. Because the MCU is a fully static design, register and memory
contents are not affected when the clock rate changes. System hardware and software
support changes in clock rate during operation.
The system clock signal can be generated in one of three ways. An internal phase-
locked loop can synthesize the clock from either an internal reference or an external
reference, or the clock signal can be input from an external frequency source. Keep
these clock sources in mind while reading the rest of this section. Figure 4-4 is a block
diagram of the system clock. Refer to APPENDIX A ELECTRICAL CHARACTERIS-
TICS for clock specifications.
EXTAL
OSCILLATOR
CRYSTAL
XTAL
Figure 4-4 System Clock Block Diagram
Freescale Semiconductor, Inc.
COMPARATOR
For More Information On This Product,
PHASE
SYSTEM INTEGRATION MODULE
Go to: www.freescale.com
SYSTEM CLOCK CONTROL
FEEDBACK DIVIDER
LOW-PASS
FILTER
XFC
W
Y
X
V
DDSYN
VCO
SYSTEM
CLOCK
CLKOUT
32 PLL BLOCK
4-9