MPC564CVR40 Freescale Semiconductor, MPC564CVR40 Datasheet - Page 333

IC MPU 32BIT W/CODE COMP 388PBGA

MPC564CVR40

Manufacturer Part Number
MPC564CVR40
Description
IC MPU 32BIT W/CODE COMP 388PBGA
Manufacturer
Freescale Semiconductor
Series
MPC5xxr
Datasheets

Specifications of MPC564CVR40

Core Processor
PowerPC
Core Size
32-Bit
Speed
40MHz
Connectivity
CAN, EBI/EMI, SCI, SPI, UART/USART
Peripherals
POR, PWM, WDT
Number Of I /o
56
Program Memory Size
512KB (512K x 8)
Program Memory Type
FLASH
Ram Size
32K x 8
Voltage - Supply (vcc/vdd)
2.5 V ~ 2.7 V
Data Converters
A/D 32x10b
Oscillator Type
External
Operating Temperature
-40°C ~ 85°C
Package / Case
388-BGA
Processor Series
MPC5xx
Core
PowerPC
Data Bus Width
32 bit
Data Ram Size
32 KB
Interface Type
CAN, JTAG, QSPI, SCI, SPI, UART
Maximum Clock Frequency
40 MHz
Number Of Programmable I/os
56
Number Of Timers
2
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
Minimum Operating Temperature
- 40 C
On-chip Adc
2 (10 bit, 32 Channel)
For Use With
MPC564EVB - KIT EVAL FOR MPC561/562/563/564
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Lead Free Status / Rohs Status
 Details

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MPC564CVR40
Manufacturer:
Freescale Semiconductor
Quantity:
10 000
Freescale Semiconductor
Bits
10
3
4
5
6
7
8
9
PRQEN
DCSLR
MFPDL
STBUC
RTDIV
CQDS
Name
LPML
TBS
Disable clock switching at loss of lock during reset. When DCSLR is clear and limp mode
is enabled, the chip will switch automatically to the backup clock if the PLL losses lock
during HRESET. When DCSLR is asserted, a PLL loss-of-lock event does not cause clock
switching. If HRESET is asserted and DCSLR is set, the chip will not negate HRESET until
the PLL acquires lock.
0 Enable clock switching if the PLL loses lock during reset
1 Disable clock switching if the PLL loses lock during reset
MF and pre-divider lock. Setting this control bit disables writes to the MF and DIVF bits.
This helps prevent runaway software from changing the VCO frequency and causing the
SPLL to lose lock. In addition, to protect against hardware interference, a hardware reset
will be asserted if these fields are changed while LPML is asserted. This bit is writable once
after power-on reset.
0 MF and DIVF fields are writable
1 MF and DIVF fields are locked
LPM lock. Setting this control bit disables writes to the LPM and CSRC control bits. In
addition, for added protection, a hardware reset is asserted if any mode is entered other
than normal-high mode. This protects against runaway software causing the MCU to enter
low-power modes. (The MSR[POW] bit provides additional protection). LPML is writable
once after power-on reset.)
0 LPM and CSRC bits are writable
1 LPM and CSRC bits are locked and hard reset will occur if the MCU is not in normal-high
Time base source.
0 Source is OSCCLK divided by either 4 or 16
1 Source is system clock divided by 16
RTC (and PIT) clock divider. At power-on reset this bit is cleared if MODCK[1:3] are all low;
otherwise the bit is set.
0 RTC and PIT clock divided by 4
1 RTC and PIT clock divided by 256
Switch to backup clock control. When software sets this bit, the system clock is switched
to the on-chip backup clock ring oscillator, and the chip undergoes a hard reset. The
STBUC bit is ignored if LME is cleared.
0 Do not switch to the backup clock ring oscillator
1 Switch to backup clock ring oscillator
Clock quarter drive strength — The COM and CQDS bits control the output buffer strength
of the CLKOUT, see
Power management request enable
0 Remains in the lower frequency (defined by DFNL) even if the power management bit in
1 Switches to high frequency (defined by DFNH) when the power management bit in the
mode
the MSR is reset (normal operational mode) or if there is a pending interrupt from the
interrupt controller
MSR is reset (normal operational mode) or there is a pending interrupt from the interrupt
controller
Table 8-9. SCCR Bit Descriptions (continued)
MPC561/MPC563 Reference Manual, Rev. 1.2
Table
8-10.
Description
Clocks and Power Control
8-31

Related parts for MPC564CVR40