82.031.0101.0 WIELAND ELECTRIC, 82.031.0101.0 Datasheet - Page 152

• Manufacturer Part Number: 82.031.0101.0
• Description: COUPLING MODULE
• Manufacturer: WIELAND ELECTRIC

Specifications of 82.031.0101.0

• Connector Type: Modular
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

selos
selos
150
POWER LINE
RFK offers ...
Installation instructions:
When tightening the terminal screw, it is
recommended that you hold it against the
conductor in order to prevent deformation
of the mounting rail and to keep the foot
of the terminal free from torsional forces.
Rising Cage Connection Technology
Rising Cage and Ring Terminal
Connection
Ring Terminal connections in two
styles:
– Screw (bolt) with nut
– Screw (bolt) with threaded current bar
Rated cross section:
Connection Range: 2/0 AWG - 500 MCM
Material:
– Insulating housing, partition, cover:
– Current carrying bar and jumper rail:
– Screws, nuts, washers, clamping
Touch Safe Covers
Partition Plates with marking capability
Jumper bar:
Available in 2, 3, or 4 pole versions.
E-Cu
bodies: galvanically zinc-plated steel
Polyamide 66/6
95 – 240 mm
2
Application advantages
The threaded hole in the foot of the
terminal type RFK 1/...PA enables the
terminals to be screwed to the mounting
rail. Perforated rails are available for the
purpose and the mounting rail is pre-drill
accordingly on site or at the factory.
Caution: Make sure that the recommended
stripped length for the conductor of 27 mm
is observed!
Connection requires ring lug terminal
Secure connection with use of lock
washers
A stripped wire can be connected
without ferules/unprepared
Secure connection due to the elastic
design of the clamping body
Due to its excellent electrical,
chemical and mechanical properties
Low contact resistance
Touch safe covers can be installed after
connections have been made and do not
increase the pitch of the assembly.
Partition plates provide both visual and
electrical separation of adjacent terminals.
They do not increase the pitch of the
assembly and can be marked with the
Wieland standard marking system.
Jumper bars are used to common the
potential of RFK terminals with ring
connection.