82.031.0101.0 WIELAND ELECTRIC, 82.031.0101.0 Datasheet - Page 335

• Manufacturer Part Number: 82.031.0101.0
• Description: COUPLING MODULE
• Manufacturer: WIELAND ELECTRIC

Specifications of 82.031.0101.0

• Connector Type: Modular
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

wiecon
Insulating plate
TOP connection
Single pole connectors
Special-purpose connectors
covers the clamping body with a plastic
plate
the safety values for air and creepage
distances and clearances of the traces of
the PC board connector are increased
fixing bolts on the insulating plate of
2 and 3pole connectors reduce the
mechanical stress on the solder joint
screw termination in same plane as
wire entry
easy access for the user in
narrow spaces
snap-on marking tag carrier
double solder tails per pole
single connectors snap together
secure, tight locking pins
the spacing can be expanded by means
of spacer plates
available spacings:
5 . 0 0/ 5.08 / 6.35/7 . 5 0/ 7 . 6 2 /10.00/
10.16/20.32 mm
with end plate
two solder tails per pole
snap together individually
5.08 mm spacing
securely fixed to the printed circuit
board by double solder tails
feed through connector
knife edge disconnect block
fuse block with G fuse insert
and integrated return conductor
test plug for 2 mm or 3 mm
test plug
Note:
The information regarding cross
sectional areas and connection types
pertains to connections without
ferrules.
The indicated rated current corresponds
to the maximum load for the PC board
with connected wire of the indicated
rated cross section.
The rated voltage is indicated as per
DIN VDE 0110 part 1 (IEC 60 664-1)
– insulation coordination for electrical
material in low voltage application –
and refers to the delivered state of the
PC board connector.
Before the PC board is fitted with
connectors, an appropriate PC board
must be selected and dimensioned
accordingly (e. g. regarding tracking
resistance of the lines and solder
joints).
Furthermore, the ambient conditions
under which the materials shall be
used, must be considered.
The indicated rated voltages will be
valid for the complete module only if
the printed circuit board and PC board
connectors are correctly and clearly
adjusted to each other.
333