82.031.0101.0 WIELAND ELECTRIC, 82.031.0101.0 Datasheet - Page 316

• Manufacturer Part Number: 82.031.0101.0
• Description: COUPLING MODULE
• Manufacturer: WIELAND ELECTRIC

Specifications of 82.031.0101.0

• Connector Type: Modular
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

wiecon
wiecon
Pluggable PC board connectors
with pin-strip headers
314
PCB
Pluggable connectors provide a simple
2-piece mateable connection between an
external connector and the printed circuit
board.
System features
Variety of types
Marking
Abbreviations for plastic materials:
PA 66/6 = Polyamide 66/6
PC
PBT
easy-to-operate screw termination
installation and maintenance friendly
quick disconnect
pole configurations from 2 to 24 poles
clear, straigthforward connection
mating in both horizontal and
vertical orientations to the printed
circuit board
clamping body always with wire
guard
spacings: (3.5/ 7/ 5 /10) mm
2 to 24 p o l e
terminal strip headers with vertical
or horizontal solder pins
solder pin diameters available in: 0.8 mm,
1 mm and 1.3 mm others are on request
smudge-proof inkjet marking directly
on the plug
clear, easily legible marking
custom marking possible, consult
factory
cost-effective marking directly on the
plug
= Polycarbonate
= Polybutylenterephthalate
Material
Insulating housings:
Metal parts:
Pin-strip headers:
Note:
use of high-quality polycarbonate
for its excellent electrical, mechanical
and chemical characteristics
(see facts
made of special alloys and/or
special surface platings
minimum feed through resistance
high corrosion resistance
secure, consistent clamping function
clamping body: nickel-plated brass
clamping screw: steel, zinc-plated and
dichromated
plug contact of type 8142 and ST 29:
tin-plated bronze
plug contact of type 8543:
nickel-plated brass
wire guard: tin-plated bronze
Insulating part: made from high-quality
Polyamide 66/6
glass-fibre reinforcement for
dimensional stability
Metal parts:
contact pin: tin plated brass
The information regarding cross
sectional areas and connection types
pertains to connections without
ferrules.
The indicated rated current pertains
to the maximum load of the
PC board connector with a connected
wire of the indicated rated cross section.
The rated voltage is indicated as per
DIN VDE 0110 part 1 (IEC 60 664-1)
– insulation coordination for electrical
material in low voltage application –
and refers to the delivered state of
the PC board connector.
Before the PC board is fitted with
connectors, an appropriate PC board
must be selected and dimensioned
accordingly (e. g. regarding tracking
resistance of the printed circuit board,
distances of the leads and solder joints).
Furthermore, the ambient conditions
under which the device is to be used
(pollution degree) must be considered.
The indicated rated voltages will be valid
for the complete module only if the
printed circuit board and its connectors
are correctly and carefully matched to
each other.
& DATA
)