82.031.0101.0 WIELAND ELECTRIC, 82.031.0101.0 Datasheet - Page 519

• Manufacturer Part Number: 82.031.0101.0
• Description: COUPLING MODULE
• Manufacturer: WIELAND ELECTRIC

Specifications of 82.031.0101.0

• Connector Type: Modular
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

wipos
wipos switch-mode power supplies –
Power competence for any control
cabinet
Power supplies are the heart of any
control cabinet. They safeguard the life of
any connected electrical and electronic
component. In addition to providing a
reliable supply to units under different
load cases, the devices themselves must
also be safe for the user.
Narrow, but powerful
Knowing that rail space is a key concern
for our customers, we designed our
new wipos power supplies with a very
narrow footprint, enabling optimal space
utilization in the control cabinet. Our
single-phase, rail-mountable devices range
from 50 to 480 W and require only 45 mm
to 86 mm of rail space.
Your life is important to us
The vertical wipos device series, pro-
vides a hinged cover for the primary-side
connection points. It safely covers all
connection points with hazardous contact
voltage. Wire entries are clearly marked
for safe and easy installation.
Overload problems –
non-existent for wipos
wipos incorporates a temperature-
controlled power limitation function as
protection against overload caused by
excessive ambient temperatures or
unfavorable installation conditions. The
output voltage is reduced causing the
output power to decrease before the
semi-conductors can reach an
impermissibly high temperature.
Parallel operation –
whatever you want
For special balancing of the output current
during parallel operation of several wipos
devices, the output can be changed.
It is set by default in a way that the output
voltage is as constant as possible,
independent of the load.
The control precision is ± 1% of the
nominal current. For parallel operation, the
output is changed in a way that an
approximately uniform load distribution is
achieved even when considering
manufacturing tolerances and slightly
different output voltages. The overall
residual ripple is very low at < 50 mV.
Further features of the wipos switch
mode power supply series:
Custom devices and solutions also
available.
Power factor correction (PFC, vertical
versions) according to EN 61000-3-2
Temperature-prompted power limitation
Efficiency up to 90%
Extended output voltage range of
23 V – 30 V
Output characteristic selectable for
output current balancing during parallel
operation
Change of current limitation via internal
potentiometer
Reduced ripple on the output
(< 50 m V)
Reduced ramp-up time < 1 s
Protection against battery discharge in
OFF state during parallel loading
operation
Red LED to signal overloads
Convenient DIN rail mounting, even for
40 A, 3-phase devices
Hiccup Mode
Optional features; remote ON/OFF,
overload signal, power failure signal,
and output characteristic switchover
UL-pending, CSA approvals
Standards
VDE 0805, EN 60950, IEC 950,
UL 1950, safety extra-low voltage
(SELV) EN 60950, EN 55011,
EN 61000-6-1/-2, EN 55022 class B
517