82.031.0101.0 WIELAND ELECTRIC, 82.031.0101.0 Datasheet - Page 740

• Manufacturer Part Number: 82.031.0101.0
• Description: COUPLING MODULE
• Manufacturer: WIELAND ELECTRIC

Specifications of 82.031.0101.0

• Connector Type: Modular
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

revos
revos
Modular industrial multipole connectors
Manager in terms of
performance and flexibility
Industrial multipole connectors function as
electro-mechanical interfaces and enable an
efficient connection between the power supply
and control lines of industrial systems and
devices. Their complexity, however, becomes
more and more demanding and sets limits to
standard connector systems.
Wieland Electric GmbH developed the modular
multipole connector system revos
the requirements of highly complex applications.
The high flexibility of the connector system
is characterized by its individual design options
which can be adapted to the various applications.
The module frames can be fitted with modular
inserts of 3 to 20 poles in a voltage range
between 100V and 1000V, and for electrical
power between 4A and 40A. Flexibility also
shows in the fact that the module frames can
be fitted inverted, meaning female and male
contacts on the same side.
The contacts for the 3, 5 and 10pole modular
inserts are turned and silver-plated and can
be used for the crimp connection technique.
For high-voltage applications, the modular
inserts are designed with 4 poles + ground
with punched and silver-plated contacts.
The contacts of the 20pole modular inserts
are also punched, but gold-plated.
You can choose among four sizes of module
frames which provide a ground connection at
the front.
Die cast aluminum housings are available for
6, 10, 16 and 24pole standard inserts and
provide sufficient protection against tough
environmental conditions.
738
FLEX
FLEX
to meet
System design
System advantages
4 frame sizes
5 different modules
17 contact variations
306 hood and housing options
Flexible usage
– The modules can be used independently of
– Signal, control and power modules can be
– Already existing modules can be combined
– Future module designs can be used due to
Safe handling
– The modules are coded and can therefore
– The connectors can be coded as per the
– Easy contact recognition because of the
– Gas-tight crimping
Cost reduction
– Small quantities of connectors can be
– Reduced number of connectors
– Low stock due to reduced product variety
– Higher availability due to reduced product
in quantities of 100 pieces or more, the
frames can be fitted with empty modules
according to your drawings.
the signal flow
combined in one connector
with new modules
the system’s modularity
not be mismated in the frame
module assignment
markings
implemented cost effectively
variety