82.031.0101.0 WIELAND ELECTRIC, 82.031.0101.0 Datasheet - Page 281

• Manufacturer Part Number: 82.031.0101.0
• Description: COUPLING MODULE
• Manufacturer: WIELAND ELECTRIC

Specifications of 82.031.0101.0

• Connector Type: Modular
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

wiecon
Types 8513-8813
Panel mount feed through pluggables
Inverted / board to board connectors
TOP version
Application specific terminals
codable:
board mounted female header with
interlocking flange available
and vertical to the printed circuit board
total height: 11 mm, while only
8 mm above the printed circuit board
in space-saving 3.5 and 3.81 mm
spacing
connector cross section: 1.5 mm
– headers with coding pins
– plug connectors with removable
with locking screw flange
insulated headers mount directly to
panel wall
provide pluggable connection
at panel
header = panel mount feed through
optional flange version for vibration
secure mating
header can be affixed with screws to
the housing walls
connection inside the housing via
wire-wrap or solder connection
vertical and horizontal solder pins
codable by means of coding pieces
inserted in available slots
as accessory
inverted plug available
screw connection, wire entry and mate
direction all in same plane
easy to operate in confined spaces
with or without integrated LED
for control systems:
– DIN rail terminal blocks with
– plug connectors in 5.00 mm spacing
– snap on to mounting rail
DIN rail terminal blocks with
pluggable connection for system 8113
vertical plug orientation
horizontal plug orientation
micro PC board connectors, 2 to 20 pole
plug and insulated header horizontal
pluggable connection at one side
coding studs
2
Material
Metal parts:
Insulating housings:
Abbreviations for plastic materials:
Note:
The information regarding cross sectional
areas and connection types pertains to
conductors without ferrules.
The indicated rated current complies with
the maximum load of the PCB connector
with connected wire of the indicated rated
cross section.
The rated voltage is indicated as per
DIN VDE 0110 part 1 (IEC 60 664-1) –
isolation coordination for electrical material
in low voltage applications – and refers to
the delivered state of the PC board
connectors.
Before the PC board is fitted with
connectors, an appropriate printed circuit
board must be selected and dimensioned
accordingly (e. g. regarding tracking
resistance of the printed circuit board,
distances of the leads and solder joints).
Furthermore, the ambient conditions
under which the device is to be used
(pollution degree) must be considered.
The indicated rated voltages will be valid
for the complete module only if the
pirnted circuit board and its connectors are
correctly and carefully matched to each
other.
glass-fibre reinforcement for high
made of special alloys and/or
special surface platings
minimum feed through resistance
high corrosion resistance
secure, consistent clamping function
clamping body and clamping screw:
made of nickel-plated brass (TOP
version: zinc-plated steel, dichromated)
plug contacts: tin-plated bronze
Polyamide 66/6 for its excellent
electrical, chemical and mechanical
characteristics
(see section facts
all housings UL 94 V-0
dimensional stability
(not available for multi-tier header and
solder parts)
colors: gray, similar to RAL 7032; black;
for others consult factory
PA 66/6 = Polyamide 66/6
PC
PBT
solder pins: made from high-
quality copper alloy
= Polycarbonate
= Polybutylenterephthalate
& DATA
)
279