82.031.0101.0 WIELAND ELECTRIC, 82.031.0101.0 Datasheet - Page 19

• Manufacturer Part Number: 82.031.0101.0
• Description: COUPLING MODULE
• Manufacturer: WIELAND ELECTRIC

Specifications of 82.031.0101.0

• Connector Type: Modular
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

fasis
Cross connection (Jumper Bars)
Wire entry guides
Marking systems
Cover with warning symbol
DQS certificates for all products
Quality standard as per DIN ISO 9001
in Development, Production, Assembly
The insulated cross connectors IVB WKF...
are completely touch safe
No partiton plates required between
jumpered terminal groups of different
potential
The cross connectors IVB WKF... bear the
same rated current as the terminal
For modular test plugs see page 177
For the connection of wires with cross
sections smaller than 18 AWG, we
recommend the use of wire entry guides
Wire entry guides prevent the wires
from being inserted beyond the optimal
clamping point and ensures a safe and
secure connection
Marking facility is down the center so that
the marking tag is not covered by the
conductor
Single marking tag in 5, 6, or 8 mm
spacing
Marking strips (10 tags) to snap on to the
terminal blocks
Tear-off marking strips for 3-digit marking
facilities per block
Custom marking upon request
Cover with warning symbol ADC to snap
on to blocks which are still live after
switched-off (VDE 0113)
Cover can only be removed with a
screwdriver
Continued control of the quality standard
by means of regular internal and external
quality audits
Compatible with certificates of other
countries:
– BSI Certificate, Great Britain
– SQS Certificate, Switzerland
– Aib-Vincotte Certificate, Belgium
– ÖQS Certificate, Austria
Material
Our wieplan software helps to plan your
DIN rail terminal block assemblies
(see page 10/11).
Note
The information regarding cross-
sectional areas and connection types
pertains to wires without ferrules.
Ferrules are not neccessary for secure
connection.
The voltage ratings apply to the
terminals in their intended application.
When different products are mounted
adjacent to each other, the proper
isolation distances must be adhered to.
For this purpose, Wieland offers a large
selection of appopriate accessories.
If the ground blocks of the WKF series
are not used in block assemblies but are
mounted to the rail as single terminal
blocks, end clamps have to be used.
A detailed description of technical data,
the standards requirements, and the
application conditions can be found in
catalogue section facts
Metal parts
Special alloys and surface treatments
provide low contact resistance and
high corrosion resistance
Clamping spring: stainless CrNi steel
Current Carrying bar: tin-plated copper
Insulating material
Polyamide has excellent electrical,
chemical and mechanical
characteristics
Insulating housing: Polyamide 66/6
Tracking resistance: CTI 600
Flammability class:
Type WKF...
Type WKIF 16...
(see also section facts
UL 94 V-0
UL 94 V-2
& DATA
& DATA
.
)
17