ISP1507BBS,118 NXP Semiconductors, ISP1507BBS,118 Datasheet - Page 69

• Manufacturer Part Number: ISP1507BBS,118
• Description: RF Transceiver USB 2.0 ULPI TRNSCVR
• Manufacturer: NXP Semiconductors

Specifications of ISP1507BBS,118

• Number Of Transceivers: 1
• Esd Protection: YeskV
• Power Supply Requirement: Single
• Operating Supply Voltage (typ): 3.3V
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Dual Supply Voltage (typ): Not RequiredV
• Dual Supply Voltage (max): Not RequiredV
• Dual Supply Voltage (min): Not RequiredV
• Pin Count: 32
• Mounting: Surface Mount
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Lead Free Status / RoHS Status: Compliant
• Other names: 935285495118 ISP1507BBS-T

NXP Semiconductors
16. Application information
Table 59.
[1]
[2]
ISP1507A_ISP1507B_1
Product data sheet
Designator
C
C
C
C
D
R
R
R
R
XTAL
C
bypass
cp(C_A)-(C_B)
filter
VBUS
ESD
pullup
RREF
VBUS
XTAL
(XTAL)SQ
For detailed information and alternative interface options, refer to the Interfacing to the ISP1507 (AN10080) application note.
For more information, contact Murata.
Recommended bill of materials
[1]
Application
highly recommended for all
applications
charge pump is used
highly recommended for all
applications
mandatory for peripherals
mandatory for host
mandatory for OTG
recommended for all
ESD-sensitive applications
recommended; for
applications with an
external V
controlled by PSW_N
mandatory in all
applications
strongly recommended for
peripheral or external 5 V
applications only
required only for
applications driving a
square wave into the XTAL1
pin
crystal is used
required only for
applications driving a
square wave into the XTAL1
pin that has a DC offset
Remark: In the following application diagrams, because the ULPI bus is not shared, the
CHIP_SELECT_N pin is connected to ground. In other applications, CHIP_SELECT_N
can be controlled by a link to 3-state the ULPI bus so that those pins can be used for other
purposes.
BUS
supply
Value
0.1 F
22 nF (8 mA), 270 nF (50 mA);
up to 470 nF (50 mA)
4.7 F
ESR capacitor (0.2
for best performance
0.1 F and 1 F to 10 F in
parallel
0.1 F and 120 F
(min) in parallel
0.1 F and 1 F to 6.5 F in
parallel
IP4359CX4/LF
4.7 k (recommended)
12 k
1 k
47 k
19.2 MHz
26 MHz
CSTCE26M0XK2***-R0
100 pF
Rev. 01 — 19 May 2008
5 %
1 %
5 %
20 %; use a LOW
20 %
to 2 )
[2]
ISP1507A; ISP1507B
Comment
-
-
-
-
-
-
Wafer-Level Chip-Scale Package (WLCSP);
ESD IEC 61000-4-2 level 4; 15 kV contact;
maximum value is determined by the voltage
drop on PSW_N caused by leakage into
PSW_N and the external supply control pin
-
-
used to avoid floating input on the XTAL1 pin
C
C
C
used to AC couple the input square wave to
the XTAL1 pin
15 kV air discharge compliant protection
L
L
XTAL
= 10 pF; R
= 10 pF; R
is not required
ULPI HS USB OTG transceiver
S
S
< 220 ; C
< 130 ; C
© NXP B.V. 2008. All rights reserved.
XTAL
XTAL
= 18 pF
= 18 pF
68 of 81