CY7C68013A-128AXI Cypress Semiconductor Corp, CY7C68013A-128AXI Datasheet - Page 13

• Manufacturer Part Number: CY7C68013A-128AXI
• Description: IC MCU USB PERIPH HI SPD 128LQFP
• Manufacturer: Cypress Semiconductor Corp
• Series: EZ-USB FX2LP™r

Specifications of CY7C68013A-128AXI

• Program Memory Type: ROMless
• Package / Case: 128-LQFP
• Applications: USB Microcontroller
• Core Processor: 8051
• Controller Series: CY7C680xx
• Ram Size: 16K x 8
• Interface: I²C, USB, USART
• Number Of I /o: 40
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Processor Series: CY7C68xx
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 16 KB
• Interface Type: I2C, USART, USB
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 40
• Number Of Timers: 3
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: CY3684
• Minimum Operating Temperature: - 40 C
• Controller Family/series: (8051) USB
• Core Size: 8 Bit
• No. Of I/o's: 40
• Program Memory Size: 16KB
• Cpu Speed: 48MHz
• No. Of Timers: 3
• Embedded Interface Type: I2C, USART, USB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: CY4611B - KIT USB TO ATA REFERENCE DESIGN428-1677 - KIT DEVELOPMENT EZ-USB FX2LP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 428-1943; CY7C68013A-128AXI

3.18 I
FX2LP has one I
one that automatically operates at boot time to load VID/PID/DID
and configuration information, and another that the 8051 uses
when running to control external I
operates in master mode only.
3.18.1 I
The I
resistors even if no EEPROM is connected to the FX2LP.
External EEPROM device address pins must be configured
properly. See
Table 8. Strap Boot EEPROM Address Lines to These Values
Table 9. Part Number Conversion Table
Document #: 38-08032 Rev. *M
16
128
256
4K
8K
16K
Note
9. This EEPROM does not have address pins.
Bytes
CY7C68013-56PVCT
2
CY7C68013-56PVC
CY7C68013-56LFC
CY7C68013-100AC
CY7C68013-128AC
C pins SCL and SDA must have external 2.2 kΩ pull up
2
C Controller
2
Part Number
C Port Pins
EZ-USB FX2
24LC00
24LC01
24LC02
24LC32
24LC64
24LC128
Example EEPROM
Table 8
2
C port that is driven by two internal controllers,
[9]
for configuring the device address pins.
CY7C68013A-56PVXCT or CY7C68014A-56PVXCT 56-pin SSOP – Tape and Reel
CY7C68013A-56PVXC or CY7C68014A-56PVXC
CY7C68013A-56LFXC or CY7C68014A-56LFXC
CY7C68013A-100AXC or CY7C68014A-100AXC
CY7C68013A-128AXC or CY7C68014A-128AXC
2
C devices. The I
N/A
A2
0
0
0
0
0
N/A
A1
0
0
0
0
0
EZ-USB FX2LP
Part Number
N/A
A0
2
0
0
1
1
1
C port
3.18.2 I
At power on reset the I
VID/PID/DID configuration bytes and up to 16 KBytes of
program/data. The available RAM spaces are 16 KBytes from
0x0000–0x3FFF and 512 bytes from 0xE000–0xE1FF. The 8051
is in reset. I
reset.
3.18.3 I
The 8051 can control peripherals connected to the I
the I
control only, it is never an I
3.19 Compatible with Previous Generation
The EZ-USB FX2LP is form, fit and with minor exceptions
functionally compatible with its predecessor, the EZ-USB FX2.
This makes for an easy transition for designers wanting to
upgrade their systems from the FX2 to the FX2LP. The pinout
and package selection are identical and a vast majority of
firmware previously developed for the FX2 functions in the
FX2LP.
For designers migrating from the FX2 to the FX2LP a change in
the bill of material and review of the memory allocation (due to
increased internal memory) is required. For more information
about migrating from EZ-USB FX2 to EZ-USB FX2LP, see the
application note titled Migrating from EZ-USB FX2 to EZ-USB
FX2LP available in the
2
CTL and I2DAT registers. FX2LP provides I
EZ-USB FX2
2
2
C Interface Boot Load Access
C Interface General-Purpose Access
2
C interface boot loads only occur after power on
CY7C68013A, CY7C68014A
CY7C68015A, CY7C68016A
56-pin SSOP
56-pin QFN
100-pin TQFP
128-pin TQFP
Cypress web
2
2
C interface boot loader loads the
Package Description
C slave.
site.
Page 13 of 62
2
C bus using
2
C master
[+] Feedback