LPC2361_62 NXP Semiconductors, LPC2361_62 Datasheet - Page 34

• Manufacturer Part Number: LPC2361_62
• Description: The LPC2361/2362 microcontrollers are based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation that combines the microcontroller with up to 128 kB of embedded high-speed flash memory
• Manufacturer: NXP Semiconductors

NXP Semiconductors
8. Limiting values
Table 4.
In accordance with the Absolute Maximum Rating System (IEC 60134).
[1]
[2]
[3]
[4]
[5]
[6]
LPC2361_62
Product data sheet
Symbol
V
V
V
V
V
V
V
I
I
T
P
V
DD
SS
stg
DD(3V3)
DD(DCDC)(3V3)
DDA
i(VBAT)
i(VREF)
IA
I
tot(pack)
ESD
The following applies to the limiting values:
a) This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive
b) Parameters are valid over operating temperature range unless otherwise specified. All voltages are with respect to V
Including voltage on outputs in 3-state mode.
Not to exceed 4.6 V.
The peak current is limited to 25 times the corresponding maximum current.
The maximum non-operating storage temperature is different than the temperature for required shelf life which should be determined
based on required shelf lifetime. Please refer to the JEDEC specification (J-STD-033B.1) for further details.
Human body model: equivalent to discharging a 100 pF capacitor through a 1.5 k series resistor.
static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated
maximum.
otherwise noted.
Limiting values
Parameter
supply voltage (3.3 V)
DC-to-DC converter supply voltage (3.3 V)
analog 3.3 V pad supply voltage
input voltage on pin VBAT
input voltage on pin VREF
analog input voltage
input voltage
supply current
ground current
storage temperature
total power dissipation (per package)
electrostatic discharge voltage
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 25 October 2011
Conditions
core and external rail
for the RTC
on ADC related pins
5 V tolerant I/O pins;
only valid when the
V
voltage is present
other I/O pins
per supply pin
per ground pin
non-operating
based on package
heat transfer, not
device power
consumption
human body model;
all pins
DD(3V3)
supply
[1]
[2][3]
[2]
[4]
[4]
[5]
[6]
Single-chip 16-bit/32-bit MCU
Min
3.0
3.0
0.5
0.5
0.5
0.5
0.5
0.5
-
-
65
-
2500
LPC2361/62
Max
3.6
3.6
+4.6
+4.6
+4.6
+5.1
+6.0
V
100
100
+150
1.5
+2500
DD(3V3)
© NXP B.V. 2011. All rights reserved.
+ 0.5
SS
unless
34 of 64
V
Unit
V
V
V
V
V
V
V
mA
mA
C
W
V