LPC2367FBD100 NXP Semiconductors, LPC2367FBD100 Datasheet - Page 64

• Manufacturer Part Number: LPC2367FBD100
• Description: The LPC2367FBD100 is a ARM7 microcontroller for embedded applications featuring a high level of integration and low power consumption at frequencies of 72 MHz
• Manufacturer: NXP Semiconductors

NXP Semiconductors
17. Revision history
Table 20.
LPC2364_65_66_67_68
Product data sheet
Document ID
LPC2364_65_66_67_68 v.7
Modifications:
Revision history
Release date
20111020
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Table 13 “Dynamic characteristics of
Table 4 “Pin
Table 4 “Pin
be left floating.”
Table 4 “Pin
for DBGEN, TMS, TDI, TRST, and RTCK pins.
Table 4 “Pin
built-in pull-down resistor.”
Table 5 “Limiting
Table 5 “Limiting
storage temperature is different than the temperature for required shelf life which
should be determined based on required shelf lifetime. Please refer to the JEDEC
spec (J-STD-033B.1) for further
Table 5 “Limiting
Added
Added
Added
Table 8 “Static
0.05V
Table 13 “Dynamic characteristics of
Added
Added
Added
Added
Added
Added
Added
All information provided in this document is subject to legal disclaimers.
DD(3V3)
Table 7 “Thermal resistance value (C/W): ±15
Table 10 “Dynamic characteristic: internal
Table 11 “Dynamic characteristic: I/O pins
Section 9 “Thermal
Section 10.3 “Electrical pin
Section 14.2 “Crystal oscillator XTAL input and component
Section 14.3 “RTC 32 kHz oscillator component
Section 14.4 “XTAL and RTCX Printed Circuit Board (PCB) layout
Section 14.5 “Standard I/O pin
Section 14.6 “Reset pin
Rev. 7 — 20 October 2011
description”: Added
description”: Updated description for USB_UP_LED.
description”: Added
description”: Added
.
characteristics”: Changed V
for RTCX1 and RTCX2 pins.
values”: Added “non-operating” to conditions column of T
values”: Updated
values”: Updated storage temperature min/max to 65/+150.
Data sheet status
Product data sheet
for TCK and TDO pins.
characteristics”.
configuration”.
Table note 12 “If the RTC is not used, these pins can
details.”.
Table note 8 “This pin has a built-in pull-up resistor.”
Table note 7 “This pin has no built-in pull-up and no
characteristics”.
Table note 5 “The maximum non-operating
LPC2364/65/66/67/68
Single-chip 16-bit/32-bit microcontrollers
flash”: Added characteristics for t
flash”: Updated table.
configuration”.
Change
notice
-
hys
typ value from 0.5V
[1]
oscillators”.
”.
%”.
selection”.
Supersedes
LPC2364_65_66_67_68 v.6
© NXP B.V. 2011. All rights reserved.
DD(3V3)
selection”.
er
and t
to
guidelines”.
stg
.
prog
64 of 69
.