HD6417615AF60 HITACHI [Hitachi Semiconductor], HD6417615AF60 Datasheet - Page 488

no-image

HD6417615AF60

Manufacturer Part Number
HD6417615AF60
Description
CMOS single-chip microcontroller
Manufacturer
HITACHI [Hitachi Semiconductor]
Datasheet
On-Chip Module Request Mode: In this mode, transfers are started by a transfer request signal
(interrupt request signal) from an on-chip peripheral module. Transfer request signals include
SCIF and SIO receive-data-full interrupts (RXI, RDFI), SCIF and SIO transmit-data-empty
interrupts (TXI, TDEI), and TPU general registers (table 11.6). If DMA transfer is enabled (DE =
1, DME = 1, TE = 0, NMIF = 0, AE = 0), DMA transfer starts upon input of a transfer request
signal.
When RXI or RDFI (transfer request due to an SCIF or SIO receive-data-full condition) is set as a
transfer request, the transfer source must be the receive data register of the corresponding module
(SCFRDR or SIRDR). When TXI or TDEI (transfer request due to an SCIF or SIO transmit-data-
empty condition) is set as a transfer request, the transfer destination must be the transmit data
register of the corresponding module (SCFTDR or SITDR).
These restrictions do not apply to TPU transfer requests.
When on-chip module request mode is used, an access size permitted by the peripheral module
register used as the transfer source or transfer destination must be set in bits TS1 and TS0 of
CHCR0 and CHCR1.
473

Related parts for HD6417615AF60