AX88796BLI ASIX [ASIX Electronics Corporation], AX88796BLI Datasheet - Page 56

• Manufacturer Part Number: AX88796BLI
• Description: Low-pin-count Non-PCI 8/16-bit 10/100M Fast Ethernet Controller
• Manufacturer: ASIX [ASIX Electronics Corporation]

5.2.3 MR2 -- Identification 1 Registers
5.2.3 MR3 – Identification 2 Registers
5.2.4 MR4 – Autonegotiation Advertisement Register
Field
2.15:0 (OUI[3:18])
Field
3.15:10 (OUI[19:24])
3.9:4 (MODEL[5:0])
3.3:0 (VERSION[3:0]) RO
Field
4.15 (NEXT_PAGE)
4.14 (ACK)
4.13 (REM_FAULT)
4.12:11 (RESERVED) X, RW
4.10 (PAUSE)
4.9 (100BASET4)
4.8 (100BASET_FD)
4.7 (100BASETX)
4.6 (10BASET_FD)
4.5 (10BASET)
4.4:0 (SELECT)
Type
RO
Type
RO
RO
Type
0, RO / PS Next Page.
0, RO
0, RW
0, RW
0, RO / PS 100Base-T4.
1, RW
1, RW
R/W
R/W
[0 0001],
RW
Description (Default = 003Bh)
Organizationally Unique Identifier. The third through the twenty-fourth
bit of the OUI assigned to the PHY manufacturer by the IEEE are to be
placed in bits. 2.15:0 and 3.15:10.
Description (Default = 1841h)
Organizationally Unique Identifier. The remaining 6 bits of the OUI.
Model Number. 6-bit model number of the device.
Revision Number. The value of the present revision number
Description (Default = 01E1h)
0 = No next page available
AX88796B does not support the next page function.
Acknowledge.
Remote Fault.
Reserved.
Write as 0, read as “don’t care”
Pause.
0 = 100BASE-T4 is not supported
100Base-TX Full Duplex.
100Base-TX Half Duplex.
10Base-T Full Duplex.
10Base-T Half Duplex.
Selector Field. Reset with the value 00001 for IEEE 802.3.
1 = Link partner ability data reception acknowledged
0 = Not acknowledged
1= Fault condition detected and advertised
0 = No fault detected
1 = Pause operation is enabled for full-duplex links
0 = Pause operation is not enabled
1 = 100BASE-TX full-duplex is supported by this device
0 = 100BASE-TX full-duplex is not supported by this device
1 = 100BASE-TX half-duplex is supported by this device
0 = 100BASE-TX half-duplex is not supported by this device
1 = 10BASE-T full-duplex is supported by this PHY
0 = 10BASE-T full-duplex is not supported by this PHY
1 = 10BASE-T half-duplex is supported by this PHY
0 = 10BASE-T half-duplex is not supported by this PHY
56
AX88796BLF / AX88796BLI
ASIX ELECTRONICS CORPORATION