R5F21258SNFP#U0 Renesas Electronics America, R5F21258SNFP#U0 Datasheet - Page 109

• Manufacturer Part Number: R5F21258SNFP#U0
• Description: IC R8C/25 MCU FLASH 52LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/2x/25r

Specifications of R5F21258SNFP#U0

• Core Size: 16/32-Bit
• Program Memory Size: 64KB (64K x 8)
• Core Processor: R8C
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, Voltage Detect, WDT
• Number Of I /o: 41
• Program Memory Type: FLASH
• Ram Size: 3K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 52-LQFP
• No. Of I/o's: 41
• Ram Memory Size: 3KB
• Cpu Speed: 20MHz
• No. Of Timers: 4
• Digital Ic Case Style: LQFP
• Supply Voltage Range: 2.2V To 5.5V
• Embedded Interface Type: I2C, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: YMCRPR8C25 - REF PLATFORM MOTOR CTRL R8C/25R0K521256S000BE - KIT EVAL STARTER FOR R8C/25
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

R8C/24 Group, R8C/25 Group
Rev.3.00
REJ09B0244-0300
Table 10.3
Serial interface interrupt
Clock synchronous serial I/O
with chip select interrupt / I
bus interface interrupt
Key input interrupt
A/D conversion interrupt
Timer RA interrupt
Timer RB interrupt
Timer RD interrupt
Timer RE interrupt
INT interrupt
Voltage monitor 1 interrupt
Voltage monitor 2 interrupt
Oscillation stop detection
interrupt
10.5.2.4
The MCU exits wait mode by a reset or a peripheral function interrupt.
The peripheral function interrupts are affected by the CM02 bit. When the CM02 bit is set to 0 (peripheral
function clock does not stop in wait mode), all peripheral function interrupts can be used to exit wait mode.
When the CM02 bit is set to 1 (peripheral function clock stops in wait mode), the peripheral functions using the
peripheral function clock stop operating and the peripheral functions operated by external signals or on-chip
oscillator clock can be used to exit wait mode.
Table 10.3 lists Interrupts to Exit Wait Mode and Usage Conditions.
Feb 29, 2008
Interrupt
Exiting Wait Mode
Interrupts to Exit Wait Mode and Usage Conditions
Page 90 of 485
2
C
Usable when operating with internal
or external clock
Usable in all modes
Usable
Usable in one-shot mode
Usable in all modes
Usable in all modes
Usable in all modes
Usable in all modes
Usable
Usable
Usable
Usable
CM02 = 0
Usable when operating with external
clock
(Do not use)
Usable
(Do not use)
Can be used if there is no filter in
event counter mode.
Usable by selecting fOCO or fC32
as count source.
(Do not use)
Usable by selecting fOCO40M as
count source
Usable when operating in real time
clock mode
Usable (INT0 to INT3 can be used if
there is no filter.)
Usable
Usable
(Do not use)
10. Clock Generation Circuit
CM02 = 1