R5F21258SNFP#U0 Renesas Electronics America, R5F21258SNFP#U0 Datasheet - Page 393

• Manufacturer Part Number: R5F21258SNFP#U0
• Description: IC R8C/25 MCU FLASH 52LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/2x/25r

Specifications of R5F21258SNFP#U0

• Core Size: 16/32-Bit
• Program Memory Size: 64KB (64K x 8)
• Core Processor: R8C
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, Voltage Detect, WDT
• Number Of I /o: 41
• Program Memory Type: FLASH
• Ram Size: 3K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 52-LQFP
• No. Of I/o's: 41
• Ram Memory Size: 3KB
• Cpu Speed: 20MHz
• No. Of Timers: 4
• Digital Ic Case Style: LQFP
• Supply Voltage Range: 2.2V To 5.5V
• Embedded Interface Type: I2C, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: YMCRPR8C25 - REF PLATFORM MOTOR CTRL R8C/25R0K521256S000BE - KIT EVAL STARTER FOR R8C/25
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

R8C/24 Group, R8C/25 Group
Rev.3.00
REJ09B0244-0300
Figure 17.6
Timer RA Set the timer to start counting
Timer RA Read the count status flag
Hardware LIN Read the Synch Break detection flag
Timer RA Set the timer to stop counting
Timer RA Read the count status flag
UART0 Communication via UART0
UART0 Communication via UART0
Feb 29, 2008
TE bit in U0C1 register ← 1
U0TB register ← 0055h
U0TB register ← ID field
TSTART bit in TRACR register ← 1
TCSTF flag in TRACR register
TSTART bit in TRACR register ← 0
TCSTF flag in TRACR register
Example of Header Field Transmission Flowchart (2)
SBDCT flag in LINST register
SBDCT = 1 ?
TCSTF = 1 ?
TCSTF = 0 ?
YES
YES
YES
Page 374 of 485
A
NO
NO
NO
Timer RA generates Synch Break.
If registers TRAPRE and TRA for
timer RA do not need to be read or
the register settings do not need to be
changed after writing 1 to the
TSTART bit, the procedure for reading
TCSTF flag = 1 can be omitted.
Zero to one cycle of the timer RA
count source is required after timer
RA starts counting before the TCSTF
flag is set to 1.
The timer RA interrupt may be used
to terminate generation of Synch
Break.
One to two cycles of the CPU clock
are required after Synch Break
generation completes before the
SBDCT flag is set to 1.
After timer RA Synch Break is
generated, the timer should be made
to stop counting.
If registers TRAPRE and TRA for timer
RA do not need to be read or the
register settings do not need to be
changed after writing 0 to the TSTART
bit, the procedure for reading TCSTF
flag = 0 can be omitted.
Zero to one cycle of the timer RA count
source is required after timer RA stops
counting before the TCSTF flag is set
to 0.
Transmit the Synch Field.
Transmit the ID field.
17. Hardware LIN