R5F21258SNFP#U0 Renesas Electronics America, R5F21258SNFP#U0 Datasheet - Page 90

• Manufacturer Part Number: R5F21258SNFP#U0
• Description: IC R8C/25 MCU FLASH 52LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/2x/25r

Specifications of R5F21258SNFP#U0

• Core Size: 16/32-Bit
• Program Memory Size: 64KB (64K x 8)
• Core Processor: R8C
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, Voltage Detect, WDT
• Number Of I /o: 41
• Program Memory Type: FLASH
• Ram Size: 3K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 52-LQFP
• No. Of I/o's: 41
• Ram Memory Size: 3KB
• Cpu Speed: 20MHz
• No. Of Timers: 4
• Digital Ic Case Style: LQFP
• Supply Voltage Range: 2.2V To 5.5V
• Embedded Interface Type: I2C, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: YMCRPR8C25 - REF PLATFORM MOTOR CTRL R8C/25R0K521256S000BE - KIT EVAL STARTER FOR R8C/25
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

R8C/24 Group, R8C/25 Group
Rev.3.00
REJ09B0244-0300
8.
8.1
Figure 8.1
Figure 8.2
Table 8.1
Single-chip mode
Processor Mode Register 0
Processor Mode Register 1
Single-chip mode can be selected as the processor mode.
Table 8.1 lists Features of Processor Mode. Figure 8.1 shows the PM0 Register and Figure 8.2 shows the PM1
Register.
b7 b6 b5 b4
NOTE:
b7 b6 b5 b4
NOTES:
0
Processor Mode
1.
1.
2.
Processor Modes
Set the PRC1 bit in the PRCR register to 1 (w rite enable) before rew riting the PM0 register.
Set the PRC1 bit in the PRCR register to 1 (w rite enable) before rew riting the PM1 register.
The PM12 bit is set to 1 by a program (and remains unchanged even if 0 is w ritten to it).
When the CSPRO bit in the CSPR register is set to 1 (count source protect mode enabled), the PM12 bit is
automatically set to 1.
Feb 29, 2008
Processor Mode
b3 b2
b3 b2
0
PM0 Register
PM1 Register
Features of Processor Mode
b1 b0
b1 b0
0 0
0 0
Bit Symbol
Bit Symbol
(b2-b0)
(b7-b4)
(b1-b0)
(b6-b3)
Symbol
Symbol
PM03
PM12
PM0
PM1
(b7)
Page 71 of 485
—
—
—
—
—
(1)
(1)
Reserved bits
Softw are reset bit
Nothing is assigned. If necessary, set to 0.
When read, the content is 0.
Reserved bits
WDT interrupt/reset sw itch bit
Nothing is assigned. If necessary, set to 0.
When read, the content is 0.
Reserved bit
SFR, internal RAM, internal ROM All pins are I/O ports or peripheral
Address
Bit Name
0004h
Address
Bit Name
Accessible Areas
0005h
Set to 0.
The MCU is reset w hen this bit is set to 1.
When read, the content is 0.
Set to 0.
0 : Watchdog timer interrupt
1 : Watchdog timer reset
Set to 0.
function I/O pins
Pins Assignable as I/O Port Pins
After Reset
After Reset
Function
Function
00h
00h
(2)
8. Processor Mode
RW
RW
RW
RW
RW
RW
RW
—
—