MC9S08AW60CPUE Freescale Semiconductor, MC9S08AW60CPUE Datasheet - Page 85

• Manufacturer Part Number: MC9S08AW60CPUE
• Description: IC MCU 64K FLASH 64-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of MC9S08AW60CPUE

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 54
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-LQFP
• Processor Series: S08AW
• Core: HCS08
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: SCI/SPI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 54
• Number Of Timers: 8
• Operating Supply Voltage: - 0.3 V to + 5.8 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWS08
• Development Tools By Supplier: DEMO9S08AW60E
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16-ch x 10-bit
• For Use With: DEMO9S08AW60E - DEMO BOARD FOR MC9S08AW60
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

6.3.6
Port F pins are general-purpose I/O pins. Parallel I/O function is controlled by the port F data (PTFD) and
data direction (PTFDD) registers which are located in page zero register space. The pin control registers,
pullup enable (PTFPE), slew rate control (PTFSE), and drive strength select (PTFDS) are located in the
high page registers. Refer to
general-purpose I/O control and
Port F general-purpose I/O is shared with TPM1 and TPM2 timer channels. When any of these shared
functions is enabled, the direction, input or output, is controlled by the shared function and not by the data
direction register of the parallel I/O port. Also, for pins which are configured as outputs by the shared
function, the output data is controlled by the shared function and not by the port data register.
Refer to
channel pins.
6.3.7
Port G pins are general-purpose I/O pins. Parallel I/O function is controlled by the port G data (PTGD) and
data direction (PTGDD) registers which are located in page zero register space. The pin control registers,
pullup enable (PTGPE), slew rate control (PTGSE), and drive strength select (PTGDS) are located in the
high page registers. Refer to
general-purpose I/O control and
Port G general-purpose I/O is shared with KBI, XTAL, and EXTAL. When a pin is enabled as a KBI input,
the pin functions as an input regardless of the state of the associated PTG data direction register bit. When
the external oscillator is enabled, PTG5 and PTG6 function as oscillator pins. In this case the associated
parallel I/O and pin control registers have no control of the pins.
Refer to
as XTAL and EXTAL pins.
Refer to
keyboard inputs.
Freescale Semiconductor
Port F
Port G
Chapter 8, “Internal Clock Generator
Chapter 10, “Timer/PWM
Chapter 9, “Keyboard Interrupt
Port F
Port G
MCU Pin:
MCU Pin:
PTF7
Bit 7
Section 6.4, “Parallel I/O
Section 6.4, “Parallel I/O
Bit 7
Section 6.5, “Pin
Section 6.5, “Pin
PTF6
(S08TPMV2)” for more information about using port F pins as TPM
6
EXTAL
PTG6/
Figure 6-7. Port G Pin Names
MC9S08AW60 Data Sheet, Rev 2
Figure 6-6. Port F Pin Names
6
(S08KBIV1)” for more information about using port G pins as
TPM2CH1
PTF5/
(S08ICGV4)” for more information about using port G pins
PTG5/
XTAL
5
5
Control” for more information about pin control.
Control” for more information about pin control.
TPM2CH0
Control” for more information about
Control” for more information about
KBI1P4
PTF4/
PTG4/
4
4
TPM1CH5
KBI1P3
PTG3/
PTF3/
3
3
KBI1P2
PTG2/
TPM1CH4
PTF2/
2
2
Chapter 6 Parallel Input/Output
KBI1P1
PTG1/
TPM1CH3
1
PTF1/
1
KBI1P0
PTG0/
Bit 0
TPM1CH2
PTF0/
Bit 0
85