AT32UC3B0512-A2UT Atmel, AT32UC3B0512-A2UT Datasheet - Page 525

• Manufacturer Part Number: AT32UC3B0512-A2UT
• Description: IC MCU AVR32 512K FLASH 64TQFP
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3B0512-A2UT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 60MHz
• Connectivity: I²C, IrDA, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 44
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 96K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TQFP, 64-VQFP
• Controller Family/series: AT32UC3B
• No. Of I/o's: 44
• Ram Memory Size: 96KB
• Cpu Speed: 60MHz
• No. Of Timers: 1
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

24.5
24.5.1
24.5.2
24.5.3
24.5.4
32059K–03/2011
Product Dependencies
I/O Lines
Debug operation
Power Manager
Interrupts
The pins used for interfacing the PWM may be multiplexed with I/O controller lines. The pro-
grammer must first program the I/O controller to assign the desired PWM pins to their peripheral
function. If I/O lines of the PWM are not used by the application, they can be used for other pur-
poses by the I/O controller.
Not all PWM outputs may be enabled. If an application requires only four channels, then only
four I/O lines will be assigned to PWM outputs.
The PWM clock is running during debug operation.
The PWM clock is generated by the Power Manager. Before using the PWM, the user must
ensure that the PWM clock is enabled in the Power Manager. However, if the application does
not require PWM operations, the PWM clock can be stopped when not needed and be restarted
later. In this case, the PWM will resume its operations where it left off.
In the PWM description, CLK_PWM is the clock of the peripheral bus to which the PWM is
connected.
The PWM interrupt line is connected to the interrupt controller. Using the PWM interrupt requires
the interrupt controller to be programmed first.
AT32UC3B
525