ATSAM3S4CA-AU Atmel, ATSAM3S4CA-AU Datasheet - Page 553

• Manufacturer Part Number: ATSAM3S4CA-AU
• Description: IC MCU 32BIT 256KB FLASH 100LQFP
• Manufacturer: Atmel
• Series: SAM3Sr

Specifications of ATSAM3S4CA-AU

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 79
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 1.95 V
• Data Converters: A/D 16x10/12b, D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LQFP
• Controller Family/series: ATSAM3S
• No. Of I/o's: 79
• Ram Memory Size: 48KB
• Cpu Speed: 64MHz
• No. Of Timers: 6
• Rohs Compliant: Yes
• Processor Series: ATSAM3x
• Core: ARM Cortex M3
• 3rd Party Development Tools: JTRACE-CM3, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: ATSAM3S-EK
• Cpu Family: AT91
• Device Core: ARM Cortex-M3
• Device Core Size: 32b
• Frequency (max): 64MHz
• Total Internal Ram Size: 48KB
• # I/os (max): 79
• Number Of Timers - General Purpose: 6
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 1.95/3.6V
• Operating Supply Voltage (min): 1.62V
• On-chip Adc: 16-chx12-bit
• On-chip Dac: 2-chx12-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 100
• Package Type: LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

29.8.1
6500C–ATARM–8-Feb-11
6500C–ATARM–8-Feb-11
Write Protection Registers
To prevent any single software error that may corrupt SSC behavior, certain address spaces can
be write-protected by setting the WPEN bit in the
(SSC_WPMR).
If a write access to the protected registers is detected, then the WPVS flag in the SSC Write Pro-
tect Status Register (US_WPSR) is set and the field WPVSRC indicates in which register the
write access has been attempted.
The WPVS flag is reset by writing the SSC Write Protect Mode Register (SSC_WPMR) with the
appropriate access key, WPKEY.
The protected registers are:
•
•
•
•
•
•
•
“SSC Clock Mode Register” on page 556
“SSC Receive Clock Mode Register” on page 557
“SSC Receive Frame Mode Register” on page 559
“SSC Transmit Clock Mode Register” on page 561
“SSC Transmit Frame Mode Register” on page 563
“SSC Receive Compare 0 Register” on page 569
“SSC Receive Compare 1 Register” on page 570
“SSC Write Protect Mode Register”
SAM3S Preliminary
SAM3S Preliminary
553
553