ATSAM3S4CA-AU Atmel, ATSAM3S4CA-AU Datasheet - Page 860

• Manufacturer Part Number: ATSAM3S4CA-AU
• Description: IC MCU 32BIT 256KB FLASH 100LQFP
• Manufacturer: Atmel
• Series: SAM3Sr

Specifications of ATSAM3S4CA-AU

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 79
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 1.95 V
• Data Converters: A/D 16x10/12b, D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LQFP
• Controller Family/series: ATSAM3S
• No. Of I/o's: 79
• Ram Memory Size: 48KB
• Cpu Speed: 64MHz
• No. Of Timers: 6
• Rohs Compliant: Yes
• Processor Series: ATSAM3x
• Core: ARM Cortex M3
• 3rd Party Development Tools: JTRACE-CM3, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: ATSAM3S-EK
• Cpu Family: AT91
• Device Core: ARM Cortex-M3
• Device Core Size: 32b
• Frequency (max): 64MHz
• Total Internal Ram Size: 48KB
• # I/os (max): 79
• Number Of Timers - General Purpose: 6
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 1.95/3.6V
• Operating Supply Voltage (min): 1.62V
• On-chip Adc: 16-chx12-bit
• On-chip Dac: 2-chx12-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 100
• Package Type: LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Table 36-6.
860
Period Value
(
Dead-Time Values
(
Duty-Cycle Values
(
Update Period Value
(
PWM_CPRDUPDx)
PWM_DTUPDx)
PWM_CDTYUPDx)
PWM_SCUPUPD)
SAM3S Preliminary
Summary of the Update of Registers of Synchronous Channels
PWM period as soon as the bit
Update is triggered at the next
• Method 3 (UPDM = 2): same as Method 2 apart from the fact that the duty-cycle values of
Update Period Register”
and automatic trigger of the update” on page
ALL synchronous channels are written by the Peripheral DMA Controller (PDC) (see
3: Automatic write of duty-cycle values and automatic trigger of the update” on page
The user can choose to synchronize the PDC transfer request with a comparison match (see
Section 36.6.3 “PWM Comparison
register.
UPDULOCK is set to 1
Write by the CPU
Not applicable
Not applicable
UPDM=0
(PWM_SCUP) (see
the bit UPDULOCK is set to 1
the bit UPDULOCK is set to 1
next PWM period as soon as
next PWM period as soon as
Update is triggered at the
Update is triggered at the
Units”), by the fields PTRM and PTRCS in the PWM_SCM
Write by the CPU
Write by the CPU
Write by the CPU
UPDM=1
PWM period as soon as the update period
PWM period as soon as the update period
counter has reached the value UPR
counter has reached the value UPR
862).
“Method 2: Manual write of duty-cycle values
Update is triggered at the next
Update is triggered at the next
Write by the CPU
Write by the PDC
UPDM=2
6500C–ATARM–8-Feb-11
“Method
864).