ATSAM3S4CA-AU Atmel, ATSAM3S4CA-AU Datasheet - Page 765

• Manufacturer Part Number: ATSAM3S4CA-AU
• Description: IC MCU 32BIT 256KB FLASH 100LQFP
• Manufacturer: Atmel
• Series: SAM3Sr

Specifications of ATSAM3S4CA-AU

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 79
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 1.95 V
• Data Converters: A/D 16x10/12b, D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LQFP
• Controller Family/series: ATSAM3S
• No. Of I/o's: 79
• Ram Memory Size: 48KB
• Cpu Speed: 64MHz
• No. Of Timers: 6
• Rohs Compliant: Yes
• Processor Series: ATSAM3x
• Core: ARM Cortex M3
• 3rd Party Development Tools: JTRACE-CM3, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: ATSAM3S-EK
• Cpu Family: AT91
• Device Core: ARM Cortex-M3
• Device Core Size: 32b
• Frequency (max): 64MHz
• Total Internal Ram Size: 48KB
• # I/os (max): 79
• Number Of Timers - General Purpose: 6
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 1.95/3.6V
• Operating Supply Voltage (min): 1.62V
• On-chip Adc: 16-chx12-bit
• On-chip Dac: 2-chx12-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 100
• Package Type: LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Figure 34-19. Quadrature Error Detection
34.6.14.4
6500C–ATARM–8-Feb-11
MCK
Abnormally formatted optical disk strips (theoretical view)
PHA
PHB
PHA
PHB
resulting PHA, PHB electrical waveforms
PHA
PHB
QERR
Even with an abnorrmaly formatted disk, there is no occurence of PHA, PHB switching at the same time.
Position and Rotation Measurement
A quadrature error is also reported by the quadrature decoder logic. Rather than reporting an
error only when 2 edges occur at the same time on PHA and PHB, which is unlikely to occur in
real life, there is a report if the time difference between 2 edges on PHA, PHB is lower than a
predefined value. This predefined value is configurable and corresponds to (MAXFILT+1) *
tMCK ns. After being filtered there is no reason to have 2 edges closer than (MAXFILT+1) *
tMCK ns under normal mode of operation. In the instance an anomaly occurs, a quadrature error
is reported on QERR flag on TC_QISR register.
MAXFILT must be tuned according to several factors such as the system clock frequency
(MCK), type of rotary sensor and rotation speed to be achieved.
When POSEN is set in TC_BMR register, position is processed on channel 0 (by means of the
PHA,PHB edge detections) and motor revolutions are accumulated in channel 1 timer/counter
and can be read through TC_CV0 and/or TC_CV1 register if the IDX signal is provided on
TIOA1 input.
Channel 0 and 1 must be configured in capture mode (WAVE = 0 in TC_CMR0).
strip edge inaccurary due to disk etching/printing process
duration < MAXFILT
MAXFILT = 2
SAM3S Preliminary
765