DF2148ATE20 Renesas Electronics America, DF2148ATE20 Datasheet - Page 150

• Manufacturer Part Number: DF2148ATE20
• Description: IC H8S MCU FLASH 128K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2148ATE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: Host Interface, I²C, IrDA, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2148ATE20; HD64F2148ATE20

Section 4 Exception Handling
4.1.2
Exceptions originate from various sources. Trap instructions and interrupts are handled as follows:
1. The program counter (PC) and condition-code register (CCR) are pushed onto the stack.
2. The interrupt mask bits are updated. The T bit is cleared to 0.
3. A vector address corresponding to the exception source is generated, and program execution
For a reset exception, steps 2 and 3 above are carried out.
4.1.3
The exception sources are classified as shown in figure 4.1. Different vector addresses are
assigned to different exception sources.
Table 4.2 lists the exception sources and their vector addresses.
Rev. 4.00 Sep 27, 2006 page 104 of 1130
REJ09B0327-0400
starts from that address.
Exception Handling Operation
Exception Sources and Vector Table
Exception
sources
Reset
Trace
Interrupts
Direct transition
Trap instruction
Figure 4.1 Exception Sources
(Cannot be used in this LSI)
External interrupts: NMI, IRQ7 to IRQ0
Internal interrupts: interrupt sources in
on-chip supporting modules