LAN9311I-NZW Standard Microsystem (Smsc), LAN9311I-NZW Datasheet - Page 115

no-image

LAN9311I-NZW

Manufacturer Part Number
LAN9311I-NZW
Description
Manufacturer
Standard Microsystem (Smsc)
Datasheet

Specifications of LAN9311I-NZW

Package
128XVTQFP
Phy/transceiver Interface
MII
Number Of Primary Switch Ports
2
Maximum Data Rate
100 Mbps
Internal Memory Buffer Size
32 KB
Vlan Support
Yes
Power Supply Type
Analog
Minimum Single Supply Voltage
3 V
Maximum Single Supply Voltage
3.6 V
Maximum Supply Current
0.295 A
Maximum Power Dissipation
1070 mW

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
LAN9311I-NZW
Manufacturer:
Standard
Quantity:
836
Part Number:
LAN9311I-NZW
Manufacturer:
Microchip Technology
Quantity:
10 000
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
SMSC LAN9311/LAN9311i
9.4
Preamble
Preamble
7 Bytes
7 Bytes
should be unique. If both are set to the same value, VLAN1 is given higher precedence and the
maximum legal frame length is set to 1522.
The Ethernet address fields of an Ethernet packet consist of two 6-byte fields: one for the destination
address and one for the source address. The first bit of the destination address signifies whether it is
a physical address or a multicast address.
The Host MAC address check logic filters the frame based on the Ethernet receive filter mode that has
been enabled. The various filter modes of the Host MAC are specified based on the state of the control
bits in the
14.3.1, "Host MAC Control Register (HMAC_CR)," on page 272
If the frame fails the filter, the Host MAC does not receive the packet. The host has the option of
accepting or ignoring the packet.
Note: This filtering function is performed after any switch fabric filtering functions. The user must
Address Filtering
1 Byte
1 Byte
SOF
SOF
ensure the switch filtering is setup properly to allow packets to be passed to the Host MAC for
further filtering.
Host MAC Control Register
Dest. Addr.
Dest. Addr.
6 Bytes
6 Bytes
2 Bytes
TPID
Source Addr.
Source Addr.
6 Bytes
6 Bytes
Standard Ethernet Frame (1518 Bytes)
Figure 9.1 VLAN Frame
Tag Control Information
Ethernet Frame with VLAN TAG (1522 Bytes)
DATASHEET
2 Bytes
2 Bytes
Type
TPID
(HMAC_CR), as shown in
User Priority
(TCI)
115
3 Bits
2 Bytes
Type
Tag Protocol ID: \x81-00
46-1500 Bytes
1 Bit
CFI
2 Bytes
Type
Indicates the frame’s priority
Data
VLAN ID
Canonical Address Format Indicator
12 Bits
for more information on this register.
Table
46-1500 Bytes
9.1. Please refer to the
Data
Defines the VLAN to
which the frame belongs
4 Bytes
FCS
Revision 1.7 (06-29-10)
4 Bytes
FCS
Section

Related parts for LAN9311I-NZW