LAN9311I-NZW Standard Microsystem (Smsc), LAN9311I-NZW Datasheet - Page 345

• Manufacturer Part Number: LAN9311I-NZW
• Manufacturer: Standard Microsystem (Smsc)

Specifications of LAN9311I-NZW

• Package: 128XVTQFP
• Phy/transceiver Interface: MII
• Number Of Primary Switch Ports: 2
• Maximum Data Rate: 100 Mbps
• Internal Memory Buffer Size: 32 KB
• Vlan Support: Yes
• Power Supply Type: Analog
• Minimum Single Supply Voltage: 3 V
• Maximum Single Supply Voltage: 3.6 V
• Maximum Supply Current: 0.295 A
• Maximum Power Dissipation: 1070 mW

Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
SMSC LAN9311/LAN9311i
14.5.2.22
BITS
31:0
RX Control Frame
Count of good packets (proper length and free of errors) that have a type
field of 8808h.
Note:
Port x MAC Receive Control Frame Count Register (MAC_RX_CTLFRM_CNT_x)
This register provides a counter of good packets with a type field of 8808h. The counter is cleared
upon being read.
Note: A bad packet is one that has an FCS or Symbol error.
This counter will stop at its maximum value of FFFF_FFFFh.
Minimum rollover time at 100Mbps is approximately 481 hours.
Register #:
Port0: 0423h
Port1: 0823h
Port2: 0C23h
DESCRIPTION
DATASHEET
345
Size:
32 bits
TYPE
RC
Revision 1.7 (06-29-10)
00000000h
DEFAULT