LAN9311I-NZW Standard Microsystem (Smsc), LAN9311I-NZW Datasheet - Page 338

• Manufacturer Part Number: LAN9311I-NZW
• Manufacturer: Standard Microsystem (Smsc)

Specifications of LAN9311I-NZW

• Package: 128XVTQFP
• Phy/transceiver Interface: MII
• Number Of Primary Switch Ports: 2
• Maximum Data Rate: 100 Mbps
• Internal Memory Buffer Size: 32 KB
• Vlan Support: Yes
• Power Supply Type: Analog
• Minimum Single Supply Voltage: 3 V
• Maximum Single Supply Voltage: 3.6 V
• Maximum Supply Current: 0.295 A
• Maximum Power Dissipation: 1070 mW

Revision 1.7 (06-29-10)
14.5.2.15
BITS
31:0
RX Pause Frame
Count of valid packets (proper length and free of errors) that have a type
field of 8808h and an op-code of 0001(Pause).
Note:
Port x MAC Receive Pause Frame Count Register (MAC_RX_PAUSE_CNT_x)
This register provides a counter of valid received pause frame packets. The counter is cleared upon
being read.
Note: A bad packet is one that has a FCS or Symbol error.
This counter will stop at its maximum value of FFFF_FFFFh.
Minimum rollover time at 100Mbps is approximately 481 hours.
Register #:
Port0: 041Ch
Port1: 081Ch
Port2: 0C1Ch
DESCRIPTION
DATASHEET
338
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Size:
32 bits
TYPE
SMSC LAN9311/LAN9311i
RC
00000000h
DEFAULT
Datasheet