LAN9311I-NZW Standard Microsystem (Smsc), LAN9311I-NZW Datasheet - Page 366

• Manufacturer Part Number: LAN9311I-NZW
• Manufacturer: Standard Microsystem (Smsc)

Specifications of LAN9311I-NZW

• Package: 128XVTQFP
• Phy/transceiver Interface: MII
• Number Of Primary Switch Ports: 2
• Maximum Data Rate: 100 Mbps
• Internal Memory Buffer Size: 32 KB
• Vlan Support: Yes
• Power Supply Type: Analog
• Minimum Single Supply Voltage: 3 V
• Maximum Single Supply Voltage: 3.6 V
• Maximum Supply Current: 0.295 A
• Maximum Power Dissipation: 1070 mW

Revision 1.7 (06-29-10)
14.5.2.43
BITS
31:8
7:0
RESERVED
RESERVED
Note:
Port x MAC Interrupt Mask Register (MAC_IMR_x)
This register contains the Port x interrupt mask. Port x related interrupts in the
Pending Register (MAC_IPR_x)
corresponding bit of this register. Clearing a bit will unmask the interrupt. Refer to
Interrupts," on page 49
Note: There are no possible Port x interrupt conditions available. This register exists for future use,
These bits must be written as 11h
and should be configured as indicated for future compatibility.
Register #:
for more information.
Port0: 0480h
Port1: 0880h
Port2: 0C80h
DESCRIPTION
may be masked via this register. An interrupt is masked by setting the
DATASHEET
366
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Size:
32 bits
TYPE
R/W
SMSC LAN9311/LAN9311i
RO
Port x MAC Interrupt
Chapter 5, "System
DEFAULT
11h
Datasheet
-