LAN9311I-NZW Standard Microsystem (Smsc), LAN9311I-NZW Datasheet - Page 182

• Manufacturer Part Number: LAN9311I-NZW
• Manufacturer: Standard Microsystem (Smsc)

Specifications of LAN9311I-NZW

• Package: 128XVTQFP
• Phy/transceiver Interface: MII
• Number Of Primary Switch Ports: 2
• Maximum Data Rate: 100 Mbps
• Internal Memory Buffer Size: 32 KB
• Vlan Support: Yes
• Power Supply Type: Analog
• Minimum Single Supply Voltage: 3 V
• Maximum Single Supply Voltage: 3.6 V
• Maximum Supply Current: 0.295 A
• Maximum Power Dissipation: 1070 mW

Revision 1.7 (06-29-10)
14:13
BITS
12:8
7:0
RESERVED
RX Data Offset (RXDOFF)
This field controls the offset value, in bytes, that is added to the beginning
of an RX data packet. The start of the valid data will be shifted by the
number of bytes specified in this field. An offset of 0-31 bytes is a valid
number of offset bytes.
Note:
RESERVED
The two LSBs of this field (D[9:8]) must not be modified while the
RX is running. The receiver must be halted, and all data purged
before these two bits can be modified. The upper three bits
(DWORD offset) may be modified while the receiver is running.
Modifications to the upper bits will take affect on the next DWORD
read.
DESCRIPTION
DATASHEET
182
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
TYPE
R/W
SMSC LAN9311/LAN9311i
RO
RO
DEFAULT
00000b
Datasheet
-
-