PEB20256E-V21 Infineon Technologies, PEB20256E-V21 Datasheet - Page 90

• Manufacturer Part Number: PEB20256E-V21
• Description: IC CONTROLLER INTERFACE 388-BGA
• Manufacturer: Infineon Technologies

Specifications of PEB20256E-V21

• Function: Multichannel Network Interface Controller (MUNICH)
• Interface: HDLC, PPP, Serial, TMA
• Voltage - Supply: 3 V ~ 3.6 V
• Current - Supply: 200mA
• Power (watts): 3W
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 388-BBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Circuits: -
• Other names: PEB20256E-V21; PEB20256E-V21IN

MFL
RFOD
CRC
ILEN
Transmit Interrupt II
•
DESID
THI
TAB
Data Sheet
THI
31
15
1
TAB
30
14
01
B
29
0
Maximum Frame Length Exceeded
The ’Maximum Frame Length Exceeded’ interrupt vector is generated,
when the length of a received data packet exceeded the frame length
defined in CONF1.MFL.
Receive Frame Overflow DMA
The ’Receive Frame Overflow DMA’ interrupt indicates that protocol
handler was unable to transfer data to the receive buffer. As soon as
receive buffer can store data again, this interrupt is generated.
CRC Error
The ’CRC Error’ interrupt vector is generated, when the internally
calculated CRC and the CRC of a received packet did not match.
Invalid Length
The ’Invalid Length’ interrupt vector is generated, when the bit length of
received frame was not divisible by 8.
Descriptor ID
This bit field is a copy of the descriptor ID of the transmit descriptor which
is currently in use. It can be used for tracking purposes.
(Transmit) Host Initiated Interrupt
The ’(Transmit) Host Initiated’ interrupt vector is generated, if bit THI is
set in a transmit descriptor and processing of this descriptor has finished.
After receiving this interrupt vector, system software can release the
descriptor, e.g. put the descriptor into a free pool.
Transmit Abort
The ’Transmit Abort’ interrupt vector is generated, either when the
’Transmit Abort/Branch’ command was given and therefore one frame
could not be transmitted completely or when NO and FE were set to 0 in
a transmit descriptor and previous frame was incompletely specified.
HTAB
28
12
11
B
27
0
26
0
QUEUE(2:0)
0
24
0
90
0
7
0
21
CHAN(7:0)
Functional Description
DESID(5:0)
PEB 20256 E
PEF 20256 E
04.2001
16
0