ATmega1280 Atmel Corporation, ATmega1280 Datasheet - Page 79

• Manufacturer Part Number: ATmega1280
• Manufacturer: Atmel Corporation

Specifications of ATmega1280

• Flash (kbytes): 128 Kbytes
• Pin Count: 100
• Max. Operating Frequency: 16 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 16
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 86
• Ext Interrupts: 32
• Usb Speed: No
• Usb Interface: No
• Spi: 5
• Twi (i2c): 1
• Uart: 4
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 16
• Adc Resolution (bits): 10
• Adc Speed (ksps): 15
• Analog Comparators: 1
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 8
• Eeprom (bytes): 4096
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8 to 5.5
• Operating Voltage (vcc): 1.8 to 5.5
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 6
• Output Compare Channels: 16
• Input Capture Channels: 4
• Pwm Channels: 15
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

13.3.2
2549N–AVR–05/11
Alternate Functions of Port B
Table 13-5.
The Port B pins with alternate functions are shown in
Table 13-6.
The alternate pin configuration is as follows:
• OC0A/OC1C/PCINT7, Bit 7
OC0A, Output Compare Match A output: The PB7 pin can serve as an external output for the
Timer/Counter0 Output Compare. The pin has to be configured as an output (DDB7 set “one”) to
serve this function. The OC0A pin is also the output pin for the PWM mode timer function.
OC1C, Output Compare Match C output: The PB7 pin can serve as an external output for the
Timer/Counter1 Output Compare C. The pin has to be configured as an output (DDB7 set (one))
to serve this function. The OC1C pin is also the output pin for the PWM mode timer function.
Port Pin
DIEOE
DIEOV
Signal
PUOE
PUOV
DDOE
DDOV
Name
PVOE
PVOV
AIO
PB7
PB6
PB5
PB4
PB3
PB2
PB1
PB0
DI
PORTA3 • PUD
OC1B/PCINT6 (Output Compare and PWM Output B for Timer/Counter1 or Pin Change
OC1A/PCINT5 (Output Compare and PWM Output A for Timer/Counter1 or Pin Change
OC2A/PCINT4 (Output Compare and PWM Output A for Timer/Counter2 or Pin Change
OUTPUT • WR
OC0A/OC1C/PCINT7 (Output Compare and PWM Output A for Timer/Counter0, Output
Overriding Signals for Alternate Functions in PA3:PA0
~(WR | ADA) •
Port B Pins Alternate Functions
A3 • ADA | D3
WR | ADA
D3 INPUT
PA3/AD3
MISO/PCINT3 (SPI Bus Master Input/Slave Output or Pin Change Interrupt 3)
MOSI/PCINT2 (SPI Bus Master Output/Slave Input or Pin Change Interrupt 2)
SRE
SRE
SRE
Compare and PWM Output C for Timer/Counter1 or Pin Change Interrupt 7)
0
0
–
SCK/PCINT1 (SPI Bus Serial Clock or Pin Change Interrupt 1)
SS/PCINT0 (SPI Slave Select input or Pin Change Interrupt 0)
ATmega640/1280/1281/2560/2561
PORTA2 • PUD
OUTPUT • WR
~(WR | ADA) •
A2• ADA | D2
D2 INPUT
WR | ADA
PA2/AD2
SRE
SRE
SRE
0
0
–
Alternate Functions
Interrupt 6)
Interrupt 5)
Interrupt 4)
Table
PORTA1 • PUD
OUTPUT • WR
~(WR | ADA) •
A1 • ADA | D1
WR | ADA
D1 INPUT
PA1/AD1
13-6.
SRE
SRE
SRE
0
0
–
PORTA0 • PUD
OUTPUT • WR
~(WR | ADA) •
A0 • ADA | D0
WR | ADA
D0 INPUT
PA0/AD0
SRE
SRE
SRE
0
0
–
79