tmp86fh46bng TOSHIBA Semiconductor CORPORATION, tmp86fh46bng Datasheet - Page 190

• Manufacturer Part Number: tmp86fh46bng
• Description: 8 Bit Microcontroller Tlcs-870/c Series
• Manufacturer: TOSHIBA Semiconductor CORPORATION

15.7
Error Code
15.7
15.8
15.8.1
When detecting an error, the device transmits the error code to the external controller, as shown in Table 15-14.
Note:If a password error occurs, TMP86FH46BNG does not transmit an error code.
Error Code
Checksum (SUM)
mand, or flash memory SUM output command is calculated in the manner, as shown above.
The checksum (SUM) is calculated with the sum of all bytes, and the obtained result is returned as a word.
The data is read for each byte unit and the calculated result is returned as a word.
Example:
The checksum which is transmitted by executing the flash memory write command, RAM loader com-
Calculation Method
Table 15-14 Error Code
A1H, A1H, A1H
A3H, A3H, A3H
62H, 62H, 62H
63H, 63H, 63H
Transmit Data
A1H
B2H
C3H
D4H
If the data to be calculated consists of the four bytes,
the checksum of the data is as shown below.
A1H + B2H + C3H + D4H = 02EAH
Page 172
Framing error in the received data.
Overrun error in the received data.
SUM (HIGH)= 02H
SUM (LOW)= EAH
Baud rate modification error.
Operation command error.
Meaning of Error Data
TMP86FH46BNG