MC68HC912BD32CFU10 FREESCALE [Freescale Semiconductor, Inc], MC68HC912BD32CFU10 Datasheet - Page 66

• Manufacturer Part Number: MC68HC912BD32CFU10
• Description: Advance Information
• Manufacturer: FREESCALE [Freescale Semiconductor, Inc]

PUCR — Pull Up Control Register
Bus Control and Input/Output
MC68HC912BD32 Rev 1.0
RESET:
Bit 7
0
0
These bits select pull-up resistors for any pin in the corresponding port
that is currently configured as an input. This register is not in the map in
peripheral mode.
Read and write anytime.
PUPE — Pull-Up Port E Enable
PUPB — Pull-Up Port B Enable
PUPA — Pull-Up Port A Enable
6
0
0
R/W is used for external writes. After reset in normal expanded mode,
it is disabled. If needed it should be enabled before any external
writes.
Pin PE1 always has a pull-up. Pins PE6, PE5, and PE4 never have
pull-ups.
This bit has no effect if port B is being used as part of the address/data
bus (the pull-ups are inactive).
This bit has no effect if port A is being used as part of the address/data
bus (the pull-ups are inactive).
Freescale Semiconductor, Inc.
For More Information On This Product,
0 = Port E pull-ups on PE7, PE3, PE2, and PE0 are disabled.
1 = Enable pull-up devices for port E input pins PE7, PE3, PE2, and
0 = Port B pull-ups are disabled.
1 = Enable pull-up devices for all port B input pins.
0 = Port A pull-ups are disabled.
1 = Enable pull-up devices for all port A input pins.
PE0.
Bus Control and Input/Output
5
0
0
Go to: www.freescale.com
PUPE
4
1
3
0
0
2
0
0
PUPB
1
0
PUPA
Bit 0
$000C
0
8-bus