DSPIC30F3010-20I/SP Microchip Technology, DSPIC30F3010-20I/SP Datasheet - Page 206

• Manufacturer Part Number: DSPIC30F3010-20I/SP
• Description: IC DSPIC MCU/DSP 24K 28DIP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F3010-20I/SP

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 20
• Program Memory Size: 24KB (8K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-DIP (0.300", 7.62mm)
• Core Frequency: 40MHz
• Core Supply Voltage: 5.5V
• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 20
• Flash Memory Size: 24KB
• Supply Voltage Range: 2.5V To 5.5V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: DSPIC30F301020ISP

dsPIC30F3010/3011
FIGURE 23-24:
DS70141F-page 206
ch0_dischrg
ch1_dischrg
1 — Software sets ADCON. SAMP to start sampling.
2 — Sampling starts after discharge period.
3 — Software clears ADCON. SAMP to start conversion.
4 — Sampling ends, conversion sequence starts.
5 — Convert bit 9.
6 — Convert bit 8.
8 — Convert bit 0.
9 — One T
ADRES(0)
ADRES(1)
Instruction
Execution
ch0_samp
ch1_samp
ADCLK
SAMP
DONE
ADIF
T
eoc
SAMP
SET SAMP
AD61
AD
is described in Section 17, “10-Bit A/D Converter” of the “dsPIC30F Family Reference Manual”, (DS70046).
AD50
for end of conversion.
10-BIT HIGH-SPEED ADC TIMING CHARACTERISTICS
(CHPS = 01, SIMSAM = 0, ASAM = 0, SSRC = 000)
1
CLEAR SAMP
2
AD60
T
SAMP
3
4
5
6
AD55
7
8
5
6
© 2010 Microchip Technology Inc.
AD55
7
8