DSPIC33FJ64MC510T-I/PT Microchip Technology, DSPIC33FJ64MC510T-I/PT Datasheet - Page 171

• Manufacturer Part Number: DSPIC33FJ64MC510T-I/PT
• Description: IC DSPIC MCU/DSP 64K 100TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ64MC510T-I/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 24x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFQFP
• For Use With: AC164333 - MODULE SKT FOR PM3 100QFPMA330013 - MODULE PLUG-IN DSPIC33 100TQFPDV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

13.0
The input capture module is useful in applications
requiring frequency (period) and pulse measurement.
The dsPIC33F devices support up to eight input
capture channels.
The input capture module captures the 16-bit value of
the selected Time Base register when an event occurs
at the ICx pin. The events that cause a capture event
are listed below in three categories:
1.
2.
3.
FIGURE 13-1:
© 2007 Microchip Technology Inc.
Note:
Note: An ‘x’ in a signal, register or bit name denotes the number of the capture channel.
-Capture timer value on every 4th rising edge
-Capture timer value on every 16th rising
ICx Pin
Simple Capture Event modes
-Capture timer value on every falling edge of
-Capture timer value on every rising edge of
Capture timer value on every edge (rising and
falling)
Prescaler Capture Event modes
input at ICx pin
input at ICx pin
of input at ICx pin
edge of input at ICx pin
INPUT CAPTURE
This data sheet summarizes the features
of this group of dsPIC33F devices. It is not
intended to be a comprehensive reference
source. To complement the information in
this data sheet, refer to the “dsPIC30F
Family Reference Manual” (DS70046).
Prescaler
(1, 4, 16)
Counter
3
INPUT CAPTURE BLOCK DIAGRAM
System Bus
ICxCON
ICM<2:0> (ICxCON<2:0>)
ICOV, ICBNE (ICxCON<4:3>)
Mode Select
Edge Detection Logic
Clock Synchronizer
ICxI<1:0>
and
Preliminary
(in IFSn Register)
Set Flag ICxIF
Interrupt
Logic
Each input capture channel can select between one of
two 16-bit timers (Timer2 or Timer3) for the time base.
The selected timer can use either an internal or
external clock.
Other operational features include:
• Device wake-up from capture pin during CPU
• Interrupt on input capture event
• 4-word FIFO buffer for capture values
• Input capture can also be used to provide
Sleep and Idle modes
- Interrupt optionally generated after 1, 2, 3 or
additional sources of external interrupts
Note:
4 buffer locations are filled
Logic
FIFO
R/W
Only IC1 and IC2 can trigger a DMA data
transfer. If DMA data transfers are
required, the FIFO buffer size must be set
to 1 (ICI<1:0> = 00).
From 16-bit Timers
TMRy TMRz
dsPIC33F
1
ICxBUF
16
0
DS70165E-page 169
16
ICTMR
(ICxCON<7>)