ADSP-BF538BBCZ-4F4 Analog Devices Inc, ADSP-BF538BBCZ-4F4 Datasheet - Page 9

• Manufacturer Part Number: ADSP-BF538BBCZ-4F4
• Description: IC, FLOAT-PT DSP, 16BIT, 400MHZ, BGA-316
• Manufacturer: Analog Devices Inc
• Series: Blackfinr
• Type: Fixed Pointr

Specifications of ADSP-BF538BBCZ-4F4

• No. Of Bits: 16 Bit
• Frequency: 400MHz
• Supply Voltage: 1.2V
• Embedded Interface Type: CAN, I2C, PPI, SPI, TWI, UART
• No. Of I/o's: 54
• Flash Memory Size: 512KB
• Interface: CAN, SPI, SSP, TWI, UART
• Clock Rate: 400MHz
• Non-volatile Memory: FLASH (512 kB)
• On-chip Ram: 148kB
• Voltage - I/o: 3.00V, 3.30V
• Voltage - Core: 1.20V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 316-CSPBGA
• Device Core Size: 16b
• Architecture: Modified Harvard
• Format: Fixed Point
• Clock Freq (max): 400MHz
• Mips: 400
• Device Input Clock Speed: 400MHz
• Ram Size: 32KB
• Program Memory Size: 512KB
• Operating Supply Voltage (typ): 1.2/2.5/3.3V
• Operating Supply Voltage (min): 0.8/2.25/2.7V
• Operating Supply Voltage (max): 1.32/3.6V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 316
• Package Type: CSPBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: ADZS-BFAUDIO-EZEXT - BOARD EVAL AUDIO BLACKFIN
• Lead Free Status / Rohs Status: Compliant

faces, including the SDRAM controller and the asynchronous
memory controller. DMA capable peripherals include the
SPORTs, SPI ports, UARTs, and PPI. Each individual DMA
capable peripheral has at least one dedicated DMA channel.
The DMA controllers support both 1-dimensional (1-D) and 2-
dimensional (2-D) DMA transfers. DMA transfer initialization
can be implemented from registers or from sets of parameters
called descriptor blocks.
The 2-D DMA capability supports arbitrary row and column
sizes up to 64K elements by 64K elements, and arbitrary row
and column step sizes up to ±32K elements. Furthermore, the
column step size can be less than the row step size, allowing
implementation of interleaved data streams. This feature is
especially useful in video applications where data can be
deinterleaved on the fly.
Examples of DMA types supported by the processor DMA con-
troller include:
In addition to the dedicated peripheral DMA channels, there are
four memory DMA channels provided for transfers between the
various memories of the ADSP-BF538/ADSP-BF538F proces-
sor’s systems. This enables transfers of blocks of data between
any of the memories—including external SDRAM, ROM,
SRAM, and flash memory—with minimal processor interven-
tion. Memory DMA transfers can be controlled by a very
flexible descriptor based methodology or by a standard register
based autobuffer mechanism.
REAL-TIME CLOCK
The ADSP-BF538/ADSP-BF538F processors’ real-time clock
(RTC) provides a robust set of digital watch features, including
current time, stopwatch, and alarm. The RTC is clocked by a
32.768 kHz crystal external to the processor. The RTC periph-
eral has dedicated power supply pins so that it can remain
powered up and clocked even when the rest of the processors
are in a low power state. The RTC provides several programma-
ble interrupt options, including interrupt per second, minute,
hour, or day clock ticks, interrupt on programmable stopwatch
countdown, or interrupt at a programmed alarm time.
The 32.768 kHz input clock frequency is divided down to a 1 Hz
signal by a prescaler. The counter function of the timer consists
of four counters: a 60 second counter, a 60 minute counter, a 24
hour counter, and a 32,768 day counter.
When enabled, the alarm function generates an interrupt when
the output of the timer matches the programmed value in the
alarm control register. There are two alarms: The first alarm is
for a time of day. The second alarm is for a day and time of that
day.
• A single, linear buffer that stops upon completion
• A circular, auto-refreshing buffer that interrupts on each
• 1-D or 2-D DMA using a linked list of descriptors
• 2-D DMA using an array of descriptors, specifying only the
full or fractionally full buffer
base DMA address within a common page
Rev. D | Page 9 of 56 | July 2010
The stopwatch function counts down from a programmed
value, with one second resolution. When the stopwatch is
enabled and the counter underflows, an interrupt is generated.
Like the other peripherals, the RTC can wake up the processors
from sleep mode upon generation of any RTC wake-up event.
Additionally, an RTC wake-up event can wake up the processor
from deep sleep mode and wake up the on-chip internal voltage
regulator from the powered down hibernate state.
Connect RTC pins RTXI and RTXO with external components
as shown in
WATCHDOG TIMER
The ADSP-BF538/ADSP-BF538F processors include a 32-bit
timer that can be used to implement a software watchdog func-
tion. A software watchdog can improve system availability by
forcing the processor to a known state through generation of a
hardware reset, nonmaskable interrupt (NMI), or general-pur-
pose interrupt, if the timer expires before being reset by
software. The programmer initializes the count value of the
timer, enables the appropriate interrupt, then enables the timer.
Thereafter, the software must reload the counter before it
counts to zero from the programmed value. This protects the
system from remaining in an unknown state where software,
which would normally reset the timer, has stopped running due
to an external noise condition or software error.
If configured to generate a hardware reset, the watchdog timer
resets both the core and the processor peripherals. After a reset,
software can determine if the watchdog was the source of the
hardware reset by interrogating a status bit in the watchdog
timer control register.
The timer is clocked by the system clock (SCLK) at a maximum
frequency of f
TIMERS
There are four general-purpose programmable timer units in
the ADSP-BF538/ADSP-BF538F processors. Three timers have
an external pin that can be configured either as a pulse-width
modulator (PWM) or timer output, as an input to clock the
SUGGESTED COMPONENTS:
ECLIPTEK EC38J (THROUGH-HOLE PACKAGE)
EPSON MC405 12 pF LOAD (SURFACE-MOUNT PACKAGE)
C1 = 22pF
C2 = 22pF
R1 = 10M:
NOTE: C1 AND C2 ARE SPECIFIC TO CRYSTAL SPECIFIED FOR X1.
CONTACT CRYSTAL MANUFACTURER FOR DETAILS. C1 AND C2
SPECIFICATIONS ASSUME BOARD TRACE CAPACITANCE OF 3pF.
C1
Figure
RTXI
SCLK
Figure 5. External Components for RTC
.
ADSP-BF538/ADSP-BF538F
5.
R1
X1
C2
RTXO