IBM25PPC440GP IBM Microelectronics, IBM25PPC440GP Datasheet - Page 13
IBM25PPC440GP
Manufacturer Part Number
IBM25PPC440GP
Description
PowerPC 440GP Embedded Processor
Manufacturer
IBM Microelectronics
Datasheet
1.IBM25PPC440GP.pdf
(72 pages)
- Current page: 13 of 72
- Download datasheet (2Mb)
PowerPC 440GP Embedded Processor Data Sheet
IIC Bus Interface
Features include:
General Purpose Timers (GPT)
Provides a separate time base counter and additional system timers in addition to those defined in the
processor core.
General Purpose IO (GPIO) Controller
Universal Interrupt Controller (UIC)
TwoUniversal Interrupt Controllers (UIC) are available. They provide control, status, and communications
necessary between the external and internal sources of interrupts and the on-chip PowerPC processor.
Note: Processor specific interrupts (for example, page faults) do not use UIC resources.
Features include:
5/13/04
• Two IIC interfaces provided
• Support for Philips® Semiconductors I
• Operation at 100kHz or 400kHz
• 8-bit data
• 10- or 7-bit address
• Slave transmitter and receiver
• Master transmitter and receiver
• Multiple bus masters
• Supports fixed V
• Two independent 4 x 1 byte data buffers
• Twelve memory-mapped, fully programmable configuration registers
• One programmable interrupt request signal
• Provides full management of all IIC bus protocols
• Programmable error recovery
• 32-bit Time Base Counter driven by the OPB bus clock
• Five 32-bit compare timers
• Controller functions and GPIO registers are programmed and accessed via memory-mapped OPB bus
• 31 of the 32 GPIOs are pin-shared with other functions. DCRs control whether a particular pin that has
• Each GPIO output is separately programmable to emulate an open drain driver (that is, drives to zero,
• 13 external interrupts
• 45 internal interrupts
• Edge triggered or level-sensitive
• Positive or negative active
• Non-critical or critical interrupt to the on-chip processor core
• Programmable interrupt priority ordering
• Programmable critical interrupt vector for faster vector processing
master accesses.
GPIO capabilities acts as a GPIO or is used for another purpose.
tri-stated if output bit is 1).
DD
IIC interface
2
C Specification, dated 1995
Page 13 of 72
Related parts for IBM25PPC440GP
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
MPU 750xx RISC 32-Bit 0.13um 600MHz 1.8V/2.5V/3.3V 750-Pin CBGA Tray
Manufacturer:
IBM MICROELECTRONICS
Datasheet:
Part Number:
Description:
MPU PowerPC750 RISC 64-Bit 0.2um 366MHz 1.8V/2.5V/3.3V 360-Pin CBGA Tray
Manufacturer:
IBM MICROELECTRONICS
Part Number:
Description:
Manufacturer:
IBM Microelectronics
Datasheet:
Part Number:
Description:
MPEG S422, MPEG S420 and MPEG SI Encoders
Manufacturer:
IBM Microelectronics
Part Number:
Description:
32-Bit RISC Embedded Controller
Manufacturer:
IBM Microelectronics
Datasheet:
Part Number:
Description:
32-Bit RISC Embedded Controller
Manufacturer:
IBM Microelectronics
Datasheet:
Part Number:
Description:
8Mb (256Kx36 & 512x18) and 4Mb (128Kx36 & 256K x 18) SRAM
Manufacturer:
IBM Microelectronics
Part Number:
Description:
Microprocessor, PowerPC 405EP Embedded Processor Data Sheet
Manufacturer:
IBM Microelectronics
Datasheet:
Part Number:
Description:
PowerPC 602 RISC Microprocessor
Manufacturer:
IBM Microelectronics
Part Number:
Description:
Controller, Digital Set-Top Box Integrated Controllers
Manufacturer:
IBM Microelectronics
Part Number:
Description:
Controller, Digital Set-Top Box Integrated Controllers
Manufacturer:
IBM Microelectronics
Part Number:
Description:
Decoder and Demux, A/V Transport/Decoders
Manufacturer:
IBM Microelectronics