LPC1343FHN33,551 NXP Semiconductors, LPC1343FHN33,551 Datasheet - Page 236

• Manufacturer Part Number: LPC1343FHN33,551
• Description: IC MCU 32BIT 32KB FLASH 33HVQFN
• Manufacturer: NXP Semiconductors
• Series: LPC13xxr

Specifications of LPC1343FHN33,551

• Program Memory Type: FLASH
• Program Memory Size: 32KB (32K x 8)
• Package / Case: 33-VQFN Exposed Pad, 33-HVQFN, 33-SQFN, 33-DHVQFN
• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 72MHz
• Connectivity: I²C, Microwire, SPI, SSI, SSP, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, WDT
• Number Of I /o: 28
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC13
• Core: ARM Cortex M3
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, UART
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 28
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, KSK-LPC1343
• Development Tools By Supplier: OM11039, OM11040, OM11046, OM11048
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Package: 33HVQFN EP
• Device Core: ARM Cortex M3
• Family Name: LPC1000
• Maximum Speed: 72 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4944; 935289655551

NXP Semiconductors
UM10375
User manual
13.7.1 SSP0 Control Register 0 (SSP0CR0 - 0x4004 0000)
13.7.2 SSP0 Control Register 1 (SSP0CR1 - 0x4004 0004)
This register controls the basic operation of the SSP controller.
Table 235: SSP0 Control Register 0 (SSP0CR0 - address 0x4004 0000) bit description
This register controls certain aspects of the operation of the SSP controller.
Bit
3:0
5:4
6
7
15:8
31:16 -
Symbol Value
DSS
FRF
CPOL
CPHA
SCR
All information provided in this document is subject to legal disclaimers.
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
00
01
10
11
0
1
0
1
-
Rev. 2 — 7 July 2010
Description
Data Size Select. This field controls the number of bits
transferred in each frame. Values 0000-0010 are not
supported and should not be used.
4-bit transfer
5-bit transfer
6-bit transfer
7-bit transfer
8-bit transfer
9-bit transfer
10-bit transfer
11-bit transfer
12-bit transfer
13-bit transfer
14-bit transfer
15-bit transfer
16-bit transfer
Frame Format.
SPI
TI
Microwire
This combination is not supported and should not be used.
Clock Out Polarity. This bit is only used in SPI mode.
SSP controller maintains the bus clock low between frames.
SSP controller maintains the bus clock high between frames.
Clock Out Phase. This bit is only used in SPI mode.
SSP controller captures serial data on the first clock transition
of the frame, that is, the transition away from the inter-frame
state of the clock line.
SSP controller captures serial data on the second clock
transition of the frame, that is, the transition back to the
inter-frame state of the clock line.
Serial Clock Rate. The number of prescaler-output clocks per
bit on the bus, minus one. Given that CPSDVSR is the
prescale divider, and the APB clock PCLK clocks the
prescaler, the bit frequency is PCLK / (CPSDVSR × [SCR+1]).
Reserved.
Chapter 13: LPC13xx SSP
UM10375
© NXP B.V. 2010. All rights reserved.
238 of 333
Reset
value
0000
00
0
0
0x00
-