HD6417727F100C Renesas Electronics America, HD6417727F100C Datasheet - Page 324

• Manufacturer Part Number: HD6417727F100C
• Description: IC SUPERH MPU ROMLESS 240QFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417727F100C

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 100MHz
• Connectivity: FIFO, SCI, SIO, SmartCard, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 104
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 2.05 V
• Data Converters: A/D 6x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 240-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -

Section 10 On-Chip Oscillation Circuits
5. Bus clock (Bφ) frequency:
6. The frequency of the peripheral clock (Pφ) becomes:
7. The output frequency of PLL circuit 1 is the product of the CKIO frequency and the
8. ×1, ×2, ×3, ×4, or ×6 can be used as the multiplication ratio of PLL circuit 1. ×1, ×1/2, ×1/3,
Rev.6.00 Mar. 27, 2009 Page 266 of 1036
REJ09B0254-0600
•
•
•
•
multiplication ratio of PLL circuit 1.
and ×1/4 can be selected as the division ratio of divider 1. ×1, ×1/2, ×1/3, ×1/4, and ×1/6 can
be selected as the division ratio of divider 2. Set the rate in the frequency control register. The
on/off state of PLL circuit 2 is determined by the mode.
Depending on the product, the clock ratio should be set to produce a frequency within one
of the ranges indicated below.
The product of the frequency of the CKIO pin, the frequency multiplication ratio of PLL
circuit 1, and the division ratio of divider 2.
For all products, the peripheral clock frequency (Pφ) should be set within the frequency
range 6 MHz to 33.34 MHz and no higher than the frequency of the CKIO pin.
The peripheral clock frequency (Pφ) should be set to 13 MHz or higher if the USB function
module is used.
100 MHz products: 24 MHz to 50 MHz
160 MHz products: 24 MHz to 66.64 MHz