UPD78F9200MA-CAC-A Renesas Electronics America, UPD78F9200MA-CAC-A Datasheet - Page 103

• Manufacturer Part Number: UPD78F9200MA-CAC-A
• Description: MCU 8BIT 1KB FLASH 128B RAM
• Manufacturer: Renesas Electronics America
• Series: 78K0S/Kx1+r

Specifications of UPD78F9200MA-CAC-A

• Package / Case: *
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 10MHz
• Number Of I /o: 7
• Core Processor: 78K0S
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Program Memory Size: 1KB (1K x 8)
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Peripherals: LVD, POR, PWM, WDT
• Core Size: 8-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -

6.4
6.4.1
in Figure 6-11 allows operation as an interval timer.
(CR000) beforehand as the interval.
the TM00 value cleared to 0 and the interrupt request signal (INTTM000) is generated.
prescaler mode register 00 (PRM00).
Setting 16-bit timer mode control register 00 (TMC00) and capture/compare control register 00 (CRC00) as shown
The basic operation setting procedure is as follows.
<1> Set the CRC00 register (see Figure 6-11 for the set value).
<2> Set any value to the CR000 register.
<3> Set the count clock by using the PRM00 register.
<4> Set the TMC00 register to start the operation (see Figure 6-11 for the set value).
Caution Changing the CR000 setting during TM00 operation may cause a malfunction. To change the
Remark For how to enable the INTTM000 interrupt, see CHAPTER 10 INTERRUPT FUNCTIONS.
Interrupt requests are generated repeatedly using the count value set in 16-bit timer capture/compare register 000
When the count value of 16-bit timer counter 00 (TM00) matches the value set to CR000, counting continues with
The count clock of the 16-bit timer/event counter can be selected using bits 0 and 1 (PRM000, PRM001) of
Setting
Operation of 16-Bit Timer/Event Counter 00
Interval timer operation
Address: FF84H After reset: 00H R/W
Symbol
PMC2
setting, refer to 6.5 Cautions Related to 16-Bit Timer/Event Counter 00 (17) Changing compare
register during timer operation.
PMC2n
CHAPTER 6 16-BIT TIMER/EVENT COUNTER 00 ( PD78F920x ONLY)
7
0
0
1
Figure 6-10. Format of Port Mode Control Register 2 (PMC2)
Port/Alternate-function (except A/D converter) mode
A/D converter mode
6
0
User’s Manual U18172EJ3V0UD
5
0
Specification of operation mode (n = 0 to 3)
4
0
PMC23
3
PMC22
2
PMC21
1
PMC20
0
101